Eutectic Solidification Processes of Fe-Cr-C-B Alloys
نویسندگان
چکیده
منابع مشابه
Eutectic Solidification Limits and Mechanical Properties of Sm-Co-Fe Alloys
Creating a permanent magnet with a higher energy product than existing materials is attractive in order to optimize magnetic performance. The eutectic microstructure of Sm-Co alloys is attractive for magnets since primary rods of the Co-phase can act as a soft magnetic phase in the matrix of the Sm 2 Co 17 hard magnetic phase, forming two-phase magnets. Fe replacement in Sm-Co alloys provides a...
متن کاملCrystallization behavior and magnetic properties of Cu-containing Fe–Cr–Mo–Ga–P–C–B alloys
Multicomponent Fe65.5Cr4Mo4Ga4P12C5B5.5 amorphous alloy is known to have good soft magnetic properties combined with large glass-forming ability. Searching for a nanocrystalline structure that could improve its magnetic properties, Cr and Mo were partially substituted by Cu. The devitrification process of Cu-containing alloys shows an additional broad crystallization event that can be described...
متن کاملAtomistic Study of Surfaces and Interfaces of Fe-Cr and Fe-Cr-Al Alloys
Surface and interface properties of Fe-Cr, Fe-Al, and Fe-Cr-Al are studied using Exact Muffin-Tin Orbitals and Monte Carlo methods and with x-ray photoelectron and Auger electron techniques. Surface composition is investigated as a function of oxidation (heating) time. Hard x ray photoelectron spectroscopy (HAXPES) is used to scan non destructively the compositions below the surface. It is foun...
متن کاملStability of eutectic carbide in Fe-Cr-Mo-W-V-C alloy
The stability of the eutectic carbide in a self-designed Fe-Cr-Mo-W-V-C alloy during solidifi atio as a alyzed i this ork. The ar ide pre ipitatio rule of the steel was calculated by Thermo-Calc.The typical microstructures at 1240 °C and 1200 °C ere o ser ed y opti al i ros ope OM ,field e issio s a i g ele tro microscope (FESEM) and transmission electron microscope (TEM). The selected area dif...
متن کاملCavitation erosion of laser processed Fe-Cr-Mn and Fe-Cr-Co alloys
Purpose: Purpose of this paper is attempt explanation how laser beam processing influence on the cavitation performance of the Fe-Cr-Mn and Fe-Cr-Co alloys. This kind of alloys are frequently used in Polish power plants to routine repairs of damaged blades working under cavitation loading. Design/methodology/approach: Padding welds of investigated alloys were tested for three cases: after laser...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1991
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.55.3_316