Eutectic Growth of Unidirectionally Solidified Fe-Cr-Ni Alloy.

Molecular dynamics simulation of Al–Co–Cr–Cu–Fe–Ni high entropy alloy thin film growth

Precipitation in a Ni - Al - Mo Directionally Solidified Eutectic Composite

The most recently developed high temperature materials are known as in-situ composites or directionally solidified eutectics. Since the composites are formed during solidification, they have excellent morphological stabilities up to near their melting temperatures. The Ni-Al-Mo system has received the greatest attention for recent several years(1)~(3) since the alloy is expected to form a struc...

Nanostructurization of Fe-Ni Alloy

Data about an effect of cyclic γ-α-γ martensitic transformations on the structure state of reverted austenite Fe-31.7 wt.% Ni-0.06 wt.% C alloy are presented. The effect of multiple direct γ-α and reverse α-γ martensitic transformations on fragmentation of austenitic grains has been investigated by electron microscopy and X-ray diffraction methods. An ultrafine structure has been formed by nano...

Stability of eutectic carbide in Fe-Cr-Mo-W-V-C alloy

The stability of the eutectic carbide in a self-designed Fe-Cr-Mo-W-V-C alloy during solidifi atio as a alyzed i this ork. The ar ide pre ipitatio rule of the steel was calculated by Thermo-Calc.The typical microstructures at 1240 °C and 1200 °C ere o ser ed y opti al i ros ope OM ,field e issio s a i g ele tro microscope (FESEM) and transmission electron microscope (TEM). The selected area dif...

New development of rapid-solidified Fe-Ga sensor/actuator alloy

Rapid-solidification method was applied to make Fe-15at%Ga and Fe-17at%Ga ribbons of 100 μm thickness. These ribbons have large magnetostriction of 270 ppm, where the coercive force exhibits a maximum value. The phenomenon is related to special metallic texture, that is, the ribbon has strongly [001]-oriented textured fine columnar microstructure with grain size of 2~5 μm. The ribbon has little...