Eulerian–Eulerian simulation of heat transfer between a gas–solid fluidized bed and an immersed tube-bank with horizontal tubes
نویسندگان
چکیده
منابع مشابه
The influence of multiple tubes on the tube-to-bed heat transfer in a fluidised bed
There have been few studies modelling both flow and heat transfer in fluidised beds. The kinetic theory of granular flow (KTGF) has been used for flow prediction in the past without heat transfer modelling. In the present study, a two-fluid Eulerian–Eulerian formulation incorporating the KTGF was applied first to a tube-to-bed reactor with one immersed tube and compared with the results in the ...
متن کاملBed Voidage and Heat Transfer in Non-Newtonian Liquid-Solid Fluidized Bed
The presence of particles in liquid-solid fluidized beds enhances the bed heat transfer, because the movement of the particles leads to an increased turbulence in the system. Moreover, the violent movement of the particles has a positive effect on fouling of the heat transfer surface. The aim of this investigation was to perform systematic measurements of bed voidage and heat transfer coeff...
متن کاملInvestigation of a Cold Model of Internally Circulating Fluidized Bed with Draft Tube to be used as a two-Zone Fluidized Bed Reactor
In this research, a cold model of internally circulating fluidized bed is investigated. The aim is to find the effects of some of the operating parameters on the performance of the reactor. Experiments were carried out in a glass column (30 mm i.d. and 25 cm height) with a centrally located draft tube (11 mm i.d. and 5 or 7 cm height). The bed was loaded with white silica particles (dp = 0.15 -...
متن کاملAnalysis of variance of nanofluid heat transfer data for forced convection in horizontal spirally coiled tubes
In the present study, an experimental study is carried out to investigate the effect of adding Al and Cu nanoparticles to the base fluid (water) on the heat transfer rate in a spirally coiled tube. The spirally coiled tube is fabricated from the straight copper tube with the inner and outer coil diameters of 100 and 420 mm, respectively. The experiments have been done for water and two types of...
متن کاملNumerical and heat transfer analysis of shell and tube heat exchanger with circular and elliptical tubes
Background: Heat exchanger is a device in many industrial applications and energy conversion systems. Various heat exchangers are designed for different industrial processes and applications. Shell and tube heat exchanger (STHE) has its own importance in the process industries. Methods: Experimental and numerical simulations are carried for a single shell and multiple pass heat exchangers with ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemical Engineering Science
سال: 2011
ISSN: 0009-2509
DOI: 10.1016/j.ces.2010.12.015