Estimation of Residual Stress Distribution in Case-Hardened Steel Bars
نویسندگان
چکیده
منابع مشابه
I / RESIDUAL STRESS DISTRIBUTION IN FeAl WELD OVERLAY ON STEEL
Neutron diffraction was used to measure the residual stress distribution in an FeAl weld overlay on steel. It was found that the residual stresses accumulated during welding were essentially removed by the post-weld heat treatment that was applied to the specimen; most residual stresses in the specimen developed during cooling following the post-weld heat treatment. The experimental data were c...
متن کاملResidual Stress Distribution in Grain-oriented Silicon Steel
We investigated the residual stress distribution in a grain of laser-irradiated and gearrolled grain-oriented Fe-3%Si silicon steels by X-ray stress measurement method in order to clarify the effect of residual stresses on magnetic domain refining. Dotted cavity lines were formed by Nd:YAG laser with a power density of 3.3 mJ/pulse for the laserirradiated sample. By using a newly developed X-ra...
متن کاملResidual Stresses in Case Hardened Materials
Fatigue behavior of case hardened parts depend to a great extent on the type of residual stresses developed in the components. Topography and metallurgical effects were the two elements which contribute much to surface integrity. Micro hardness of the gas carburized (EN 33 and EN 36) and Induction hardened (AISI 1040 and AISI 6150) specimens obtained during experiments, showed that there was gr...
متن کاملFinite Element Analysis of Hardened Steel Cutting
Hard machining, as attractive replacement for many rough and finish grinding operation, generates high cutting forces and temperature that enhance tool wear when act together. Therefore, the tool geometry and machining parameters have to be carefully optimized for a given material. Because of high cost and time consuming experimental work up-to-date advanced software for modeling and simulation...
متن کاملNumerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming
Tube hydroforming (THF) process is used to produce the complex components from the initial cylindrical tubes. In this paper, T- shape component was formed using a tube hydroforming machine and the residual stresses of hydroformed tube was determined by hole drilling method. Subsequently, the thickness distribution and residual stresses of final tube were investigated using experimental and fini...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1972
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.38.1961