Estimation of fracture toughness of X65 and X70 steels by DWTT
نویسندگان
چکیده
منابع مشابه
Carbide Structure and Fracture Toughness of High Speed Tool Steels
In the present study, M2 high speed steels were fabricated by using electro-slag rapid remelting process. Carbide structure was analysed and the fracture toughness and hardness were also measured after austenitization treatment at 1190 and 1210C followed by tempering treatment at 535C for billets with various diameters from 16 to 60 mm. Electro-slag rapid remelting (ESRR) process is an advanced...
متن کاملMezzo-scopic Analysis of Fracture Toughness in Steels
The cleavage fracture toughness of steels was mezzo-scopically analyzed on the basis of the statistical local fracture criterion approach. The statistical stress criterion at the crack tip region suggests that the cleavage fracture toughness in steels can be described as a function of the yield stress, the cleavage fracture stress, and other mechanical properties of the materials. Formulation o...
متن کاملA new brittleness index for estimation of rock fracture toughness
Assessment of the correlation between rock brittleness and rock fracture toughness has been the subject of extensive research works in the recent years. Unfortunately, the brittleness measurement methods have not yet been standardized, and rock fracture toughness cannot be estimated satisfactorily by the proposed indices. In the present study, statistical analyses are performed on some data col...
متن کاملIndustrial application of Instrumented DWTT in evaluating material resistance to ductile fracture for modern pipeline steels
CTOAC of typical X70, X80 and X90 pipeline steels plates were evaluated by using energy based regression method upon their single specimen. Clear difference in the material resistance to ductile cracking could be distinguished by the values of CTOAC and their characteristic fracture surface. The region of stable cracking on the fracture surface could be identified from the dynamic crack extensi...
متن کاملEvaluation of Fracture Toughness by Stretched Zone Method in Machine Structural Steels by
The elastic-plastic fracture toughness JIc tests by the stretched zone method were performed to obtain JIc values for machine structural steels. The validity of the JIc values obtained was evaluated, and the effects of the heat treatment conditions and microstructure of steels on the JIc values were investigated by use of streched zone width, SZW. The results obtained are summarized as follows....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Institute of Gas
سال: 2012
ISSN: 1226-8402
DOI: 10.7842/kigas.2012.16.3.054