Estimation of creep constitutive equation by creep indentation test using cylindrical indenter
نویسندگان
چکیده
منابع مشابه
Analysis on Pseudo-steady Indentation Creep
Theoretical analysis and finite element (FE) simulation have been carried out for a constant specific load rate (CSLR) indentation creep test. Analytical results indicate that both the representative stress and the indentation strain rate become constant after a transient period. Moreover, the FE simulation reveals that both the contours of equivalent stress and equivalent plastic strain rate u...
متن کاملPrediction of the Constitutive Equation for Uniaxial Creep of a Power-Law Material through Instrumented Microindentation Testing and Modeling
Indentation creep tests and finite element simulations were performed on a model material to show that the constitutive equation for conventional uniaxial creep can be derived using the instrumented indentation testing technique. When the indentation pressure and the indentation creep rate are maintained at constant values of ps and _ 3⁄4inðsÞ, respectively, the contours of the equivalent stres...
متن کاملA viscoelastic constitutive model can accurately represent entire creep indentation tests of human patella cartilage.
Cartilage material properties provide important insights into joint health, and cartilage material models are used in whole-joint finite element models. Although the biphasic model representing experimental creep indentation tests is commonly used to characterize cartilage, cartilage short-term response to loading is generally not characterized using the biphasic model. The purpose of this stud...
متن کاملA New Method for Estimation of Creep of Concrete Using Short-TermTests under Higher Temperature
In the Present study, attempt will be made to propose a new method for prediction of long-term essential creep of concrete utilizing some short-term creep tests under high temperature. To do so, regarding the similarities between essential creep of concrete and creep in viscoelastic materials, the time–temperature equivalence relation in viscoelastic materials is evaluated for concrete. This re...
متن کاملIndentation creep studies of iron aluminide intermetallic alloy
Indentation creep behaviour of iron aluminide intermetallic (Fe–28Al–3Cr) was studied in the temperature range of 843–963 K. The hardness and the plasticity parameter were also calculated from room temperature to 1273 K. The variation of hardness with time showed that the stress exponent ðnÞ was weakly dependent on temperature. Thermal activation parameter-activation area and energy were also c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanical Engineering Journal
سال: 2020
ISSN: 2187-9745
DOI: 10.1299/mej.20-00232