Estimation of copper concentrate grade for copper flotation

Vitrification of copper flotation waste.

The vitrification of an hazardous iron-rich waste (W), arising from slag flotation of copper production, was studied. Two glasses, containing 30wt% W were melted for 30min at 1400 degrees C. The first batch, labeled WSZ, was obtained by mixing W, blast furnace slag (S) and zeolite tuff (Z), whereas the second, labeled WG, was prepared by mixing W, glass cullet (G), sand and limestone. The glass...

Recovery of Copper from Copper Slag and Copper Slag Flotation Tailings by Oxidative Leaching

Copper smelter slag and copper smelter slag flotation tailings were leached using sulphuric acid solutions, without or with the addition of either ferric sulphate or hydrogen peroxide. Copper extraction from the slag was typically found to be twice as high as that from the slag flotation tailings. Hydrogen peroxide was determined to be the best lixiviant. Thus, copper and iron extractions were ...

Modofication of the Sarcheshmeh copper complex flotation circuit in response to a reduction in feed grade

The new copper processing plant of the Sarcheshmeh copper complex consists of two parallel circuits. After a primary crushing, the ore is sent to a SAG mill, and the product is further ground in a ball mill. The overflow of the hydrocyclones is fed to a flotation circuit that contains 8 rougher tank cells (RCS130), 3 cleaner cells (RCS50), 5 scavenger cells (RCS50), and a flotation column (as r...

Comparison of various extractants for recovery of Copper from Sarcheshmeh Chalcopyrite concentrate Ammonia/Ammonium Carbonate Leaching

Solvent extraction of copper from the copper leach solution obtained from the ammoniacal carbonate leaching of the Sarcheshmeh copper concentrate was carried out, and the performance of CP-150, LIX984N, and Kelex100 as well as the effects of different parameters involved were investigated. According to the results obtained, the extraction kinetics of all the three extractants was fast. High con...

Multichannel reflectance spectral assaying of zinc and copper flotation slurries