Estimation of Control Rod Worth in a VVER-1000 Reactor using DRAGON4 and DONJON4
نویسندگان
چکیده
منابع مشابه
Primary Loop Study of a VVER-1000 Reactor With special Focus on Coolant Mixing
In this paper a detailed model of a VVER1000 reactor pressure vessel (RPV) with the extension of simplified primary loops is presented (Loop model). The primary loop components like steam generators and pumps are modelled by the outer shapes and additional source terms for energy and momentum exchange. The RPV model part is tested without primary loops and compared with former results obtained ...
متن کاملModeling the measurement of VVER-1000 reactor power by neutron and gamma radiation with MCNP code
The present study deals with a new method for measuring the power of a reactor. This method uses gamma and neutron radiation resulted from the entire reactor structure, without changing its structure (online). In terms of functionality, this method can measure the reactor power in real-time and report it instantly. In order to obtain the relationship between reactor power and gamma and neutron ...
متن کاملDetailed Cfx-5 Study of the Coolant Mixing within the Reactor Pressure Vessel of a Vver-1000 Reactor during a Non-symmetrical Heat-up Test
As part of the reactor dynamics activities of FZK/IRS, the qualification of a detailed 3D CFD model of a reactor pressure vessel is a key step in safety evaluations for improving predictive capabilities and acceptability of commercial CFD tools in reactor physics. The VVER-1000 Coolant Transient Benchmark, initiated by OECD, represents an excellent opportunity for validation. In this work a CFD...
متن کاملThermo-Hydraulic Investigation of Nanofluid as a Coolant in VVER-440 Fuel Rod Bundle
The main purpose of this study is to perform numerical simulation of nanofluids as the coolant in VVER-440 fuel rod bundle. The fuel rod bundle contains 60 fuel rods with length of 960 mm and 4 spacer grids. In VVER-440 fuel rod bundle the coolant fluid (water) is in high pressure and temperature condition. In the present Thermo-hydraulic simulation, water-AL2O3 nanofluids containing various vo...
متن کاملEstimation of pyrolysis product of LDPE degradation using different process parameters in a stirred reactor
Pyrolysis of low density polyethylene (LDPE) by equilibrium fluid catalytic cracking (FCC) was studied in a stirred reactor under different process parameters. In this work, the effect of process parameters such as degradation temperature (420-510°C), catalyst/polymer ratio (0-60%), carrier gas type (H2, N2, ethylene, propylene, Ar and He), residence time and agitator speed (0-300 rpm) on the c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nukleonika
سال: 2014
ISSN: 0029-5922
DOI: 10.2478/nuka-2014-0006