Estimating the demagnetization factors for regular permanent magnet pieces

نویسندگان

چکیده

In this paper, methods for finding the demagnetization factor, specifically permanent magnets, are considered and compared. Widely applied cited literature expressions compared to high resolution numerical modeling in order establish applicability of expressions. Overall, found be very closely correlated with results. second part, a simple geometrically based method find factor is proposed Fairly good correspondence found, indicating method.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Study on Permanent Magnet Synchronous Demagnetization Fault Performance

The relationship of permanent magnetic material characteristic parameters was analyzed, and a simulation method of a permanent magnet synchronous motor (PMSM) rotor demagnetization fault was put forward. Based on this, a simulation model of the PMSM under partial demagnetization and uniform demagnetization fault were established, and different degrees demagnetization fault was simulated. Relati...

متن کامل

Measurement of radiation-induced demagnetization of NdFeB permanent magnet material for ERL undulators

The note describes measurement of NdFeB permanent magnet (PM) material demagnetization induced by high-energy electron radiation. In experiments we compared N40 and N40SH grades from Stanford Magnets Company, which have different intrinsic coercive forces. Dimensions of the tested PM blocks were close to those that will be used for ERL undulator construction. It was found that depending on dire...

متن کامل

Online Fault Detection of Permanent Magnet Demagnetization for IPMSMs by Nonsingular Fast Terminal-Sliding-Mode Observer

To prevent irreversible demagnetization of a permanent magnet (PM) for interior permanent magnet synchronous motors (IPMSMs) by flux-weakening control, a robust PM flux-linkage nonsingular fast terminal-sliding-mode observer (NFTSMO) is proposed to detect demagnetization faults. First, the IPMSM mathematical model of demagnetization is presented. Second, the construction of the NFTSMO to estima...

متن کامل

Investigation of Permanent Magnet Demagnetization in Synchronous Machines during Multiple Short-Circuit Fault Conditions

Faults in electrical machines can vary in severity and affect different parts of the machine. This study focuses on various kinds of short-circuits on the terminal side of a generic 20 kW surface mounted permanent magnet synchronous generator and how successive faults affect the performance of the machine. The study was conducted with the commercially available finite element method software CO...

متن کامل

A Study of End-effect on Demagnetization in Surface Permanent Magnet Motor without Overhang

In order to compensate the low performance of ferrite magnet, surface permanent magnet mounted (SPM) motor has considerably thicker magnet than air-gap length, thus end effect, which is determined by the ratio between magnetic air-gap and stack length, is negligible. As a result, 2-D finite element analysis (FEA), which is not possible to consider end effect, is generally used to ensure analysi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: AIP Advances

سال: 2021

ISSN: ['2158-3226']

DOI: https://doi.org/10.1063/5.0060897