Estimate of Machine Settings in Hypoid Gear Cutting.
نویسندگان
چکیده
منابع مشابه
Simulation Research and Parameter Optimization for Hypoid Gear NC Machining
The paper studied hypoid gear CNC machining theory and simulation processing. Through construct a simulation case of hypoid gear machining system, optimization processing parameters for the main aspects, verify the effectiveness of pre-correction system.
متن کاملDynamics of Hypoid Gear Transmission With Nonlinear Time-Varying Mesh Characteristics
The coupled translation-rotation vibratory response of hypoid geared rotor system due to loaded transmission error excitation is studied by employing a generalized 3-dimensional dynamic model. The formulation includes the effects of backlash nonlinearity as well as time-dependent mesh position and line-of-action vectors. Its mesh coupling is derived from a quasi-static, 3-dimensional, loaded to...
متن کاملNew Modeling Methods of Spiral Bevel and Hypoid Gear Based On the CAD Surface Design Features
Based on the comprehensive analysis of previous research about the spiral bevel and hypoid gear, principle of forming spherical involute tooth surface was proposed with the spherical involute that was new theory applied in the field of their modeling. According to precise shape of tooth surfaces, each part of the quick and accurate derivations of the basic parametric equation of the tooth profi...
متن کاملPerformance analysis of generated hypoid gear based on measured tooth flank form data
Article history: Received 18 February 2013 Received in revised form 19 September 2013 Accepted 22 September 2013 Available online 24 October 2013 A method for predicting and analyzing the tooth contact pattern, vibration, and strength of a generated hypoid gear is needed to achieve a low-noise design and adequate quality control. However, it is not easy to analyze the performance of a generated...
متن کاملDesign and Manufacture of Spiral Bevel Gears with Reduced Transmission Errors
A method for the determination of the optimal polynomial functions for the conduction of machine-tool setting variations in pinion teeth finishing in order to reduce the transmission errors in spiral bevel gears is presented. Polynomial functions of order up to five are applied to conduct the variation of the cradle radial setting and of the cutting ratio in the process for pinion teeth generat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 1998
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.64.4388