Essential work of fracture, crack tip opening displacement, and J-integral relationship for a ductile polymer film
نویسندگان
چکیده
منابع مشابه
An Integrated Crack-opening Method for Determining the Work of Fracture of Bonded Polymer Interfaces
We describe a non-destructive and inexpensive way of measuring the interface toughness between polymeric layers in microfabricated devices. A flat surface is bonded under pressure to a surface patterned with microscopic steps. When the pressure is removed, cracks develop at the interface as the material peels away from the steps. The toughness of the bond can be inferred from the crack lengths....
متن کاملEffect of Constraint on Ductile Crack Growth and Ductile-Brittle Fracture Transition of a carbon Steel
Ductile-brittle fracture transition was investigated using compact tension (CT) specimens from -70 o C to 40 o C for a carbon steel. Large deformation finite element analysis has been carried out to simulate the stable crack growth in the compact tension (CT, a/W=0.6), three point-point bend (SE(B), a/W=0.1) and centre-cracked tension (M(T), a/W=0.5) specimens. Experimental crack tip opening di...
متن کاملPearlitic ductile cast iron: damaging micromechanisms at crack tip
Ductile cast irons (DCIs) are characterized by a wide range of mechanical properties, mainly depending on microstructural factors, as matrix microstructure (characterized by phases volume fraction, grains size and grain distribution), graphite nodules (characterized by size, shape, density and distribution) and defects presence (e.g., porosity, inclusions, etc.). Versatility and higher performa...
متن کاملFracture Mechanism of a Bainite Steel in Precracked and Notched Specimens at Low Temperature
Precracked and notched specimens were used to investigate the fracture mechanism of a bainite steel at low temperature. The critical fracture event was studied using metallographic sectioning method. The results showed that the critical cleavage event was different in the precracked and the notched specimens. At -196C, all specimens fractured at lower-shelf region without any ductile crack grow...
متن کاملUsing the Essential Work of Fracture Method for Studying Physical Aging in Thin, Ductile, Polymeric Films
Water-filled, drop impact tests on full-scale, blow-molding polyester bottles showed that impact properties change significantly after 30 days of aging at 50°C. To q u a n e this deleterious effect of aging, we did small-scale laboratory experiments using the essential work of fracture method (EWFM). We measured the essential work of fracture of thin specimens cut from the sides of blow-molded ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Testing
سال: 2016
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2016.09.004