Erratum to: Multi-response optimization using the Taguchi-based grey relational analysis: a case study for dissimilar friction stir butt welding of AA6082-T6/AA5754-H111
نویسندگان
چکیده
منابع مشابه
Dissimilar friction stir lap welding of Al-Mg to CuZn34: Application of grey relational analysis for optimizing process parameters
This study focused on the optimization of Al—Mg to CuZn34 friction stir lap welding (FSLW) process for optimal combination of rotational and traverse speeds in order to yield favorable fracture load using Grey relational analysis (GRA). First, the degree of freedom was calculated for the system. Then, the experiments based on the target values and number of considered levels, corresponding orth...
متن کاملdissimilar friction stir lap welding of al-mg to cuzn34: application of grey relational analysis for optimizing process parameters
this study focused on the optimization of al—mg to cuzn34 friction stir lap welding (fslw) process for optimal combination of rotational and traverse speeds in order to yield favorable fracture load using grey relational analysis (gra). first, the degree of freedom was calculated for the system. then, the experiments based on the target values and number of considered levels, corresponding orth...
متن کاملMulti-Response Optimization of Resin Finishing by Using a Taguchi-Based Grey Relational Analysis
In this study, the influence and optimization of the factors of a non-formaldehyde resin finishing process on cotton fabric using a Taguchi-based grey relational analysis were experimentally investigated. An L27 orthogonal array was selected for five parameters and three levels by applying Taguchi's design of experiments. The Taguchi technique was coupled with a grey relational analysis to obta...
متن کاملWelding Parameter Optimization of Alloy Material by Friction Stir Welding using Taguchi Approach
Friction stir welding is used as a solid state joining process for soft materials such as aluminium alloys and also for hard materials like steels. It avoids many of the common problems obtained in fusion welding. In mechanical, civil, automobile, naval, and aeronautical engineering beams are widely used of the magnesium alloys for different applications and that are joined by conventional iner...
متن کاملFriction stir welding of dissimilar alloys – a perspective
Friction stir welding does not involve bulk melting of the components that are joined. This has inspired attempts to exploit it for joining materials which differ in properties, chemical composition or structure, and where fusion can lead to detrimental reactions. The purpose of this special issue of Science and Technology of Welding and Joining was to assess the status of friction stir welding...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The International Journal of Advanced Manufacturing Technology
سال: 2013
ISSN: 0268-3768,1433-3015
DOI: 10.1007/s00170-013-4963-4