Erratum for “Strength of Square-Tube Connections Under Combined Loads”
نویسندگان
چکیده
منابع مشابه
Dynamic behaviour of square and triangular offshore tension leg platforms under regular wave loads
Among compliant platforms, the tension leg platform (TLP) is a hybrid structure. With respect to the horizontal degrees of freedom, it is compliant and behaves like to a floating structure, whereas with respect to the vertical degrees of freedom, it is stiff and resembles a fixed structure and is not allowed to float freely. The greatest potential for reducing costs of a TLP in the short term i...
متن کاملOptimization of Composite, Stiffened, Imperfect Panels under Combined Loads for Service in the Postbuckling Regime
Local buckling and postbuckling of panels stiffened by stringers and rings and subjected to combined in-plane loads is explored with the use of a single module model that consists of one stringer and a width of panel skin equal to the stringer spacing. The cross-section of the skin-stringer module is discretized and the displacement field is assumed to vary trigonometrically in the axial direct...
متن کاملTOPOLOGY OPTIMIZATION OF STRUCTURES UNDER TRANSIENT LOADS
In this article, an efficient methodology is presented to optimize the topology of structural systems under transient loads. Equivalent static loads concept is used to deal with transient loads and to solve an alternate quasi-static optimization problem. The maximum strain energy of the structure under the transient load during the loading interval is used as objective function. The objective f...
متن کاملAnalysis of a Beam under Moving Loads
Abstract: It is assumed that a beam made of material has a physical nonlinear behavior. This beam is analyzed under the moving concentrated and distributed continuous loads. The vibration equations of motion are derived from the Hamilton's Principle and Euler–Lagrange Equation. In this study, the amplitude of vibration, circular frequency, bending moment, stress and deflection of the beam has b...
متن کاملDynamic Compression of Square Tube Cellular Structures
Aluminum cellular structures have been fabricated by combining a two-dimensional [0◦/90◦]2 arrangement of square Al 6061-T6 alloy tubes with orthogonal tubes inserted in the out-of-plane direction. By varying the tube wall thickness, the resulting three-dimensional cellular structures had relative densities between 11 and 43%. The dynamic compressive response of the three-dimensional cellular s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Structural Division
سال: 1973
ISSN: 0044-8001,2690-3377
DOI: 10.1061/jsdeag.0003505