Erratum for “Plastic Behavior of Hollow Structural Sections”

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Collision cross sections for structural proteomics.

Ion mobility mass spectrometry (IM-MS) allows the structural interrogation of biomolecules by reporting their collision cross sections (CCSs). The major bottleneck for exploiting IM-MS in structural proteomics lies in the lack of speed at which structures and models can be related to experimental data. Here we present IMPACT (Ion Mobility Projection Approximation Calculation Tool), which overco...

متن کامل

a structural survey of the polish posters

تصویرسازی قابلیتهای فراوانی را دارا است

15 صفحه اول

Bending Fatigue Tests and Finite Element Models of Steel Rectangular Hollow Sections [SRHS]

The Welding in cold formed areas is not only an open question for statically loaded sections (brittle fracture) but also for dynamically loaded structures (fatigue resistance). A lot of structures are subjected to dynamic loadings and unfortunately very little information about the influence of welding in the cold formed areas on fatigue resistance is available. In order to establish the fatigu...

متن کامل

experimental studies on gfrp repaired hollow-block concrete sections

this study evaluates two different types of techniques for concrete hollow-block sections reinforced with traditional steel rebars and wire meshes, and compares their structural behaviour to that of an ordinary reinforced concrete beam section. the comparisons are based on the responses both before and after they were repaired with glass fibre reinforced polymers (gfrp). the specimens were subj...

متن کامل

Infrared transmissive, hollow plastic waveguides with inner Ag-Agl coatings.

Hollow polycarbonate waveguides with thin-film coatings of Ag-AgI were fabricated by liquid-phase chemistry methods. These hollow waveguides, which have bore sizes ranging from 500 to 2000 microm and lengths as long as 2 m, are transmissive from 2 to more than 20 microm. The lowest loss of 0.02 dB/m was obtained for a straight 2000 microm bore guide at 10.6 microm. This is to our knowledge the ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of the Structural Division

سال: 1973

ISSN: 0044-8001,2690-3377

DOI: 10.1061/jsdeag.0003475