Erosion resistance of surface engineered 6000 series aluminium alloy
نویسندگان
چکیده
منابع مشابه
The Use of Modelling Techniques to Describe Recrystallized Grain Size of Commercially Processed 6000 Series Aluminium Alloy Components
The development of grain size during commercial thermomechanical processing of 6000 series aluminium alloy components has been investigated by combining physical experiments and modelling techniques. A range of grain structures was generated by varying both deformation temperature and heat treatment practice. The different deformation conditions were simulated by finite element modelling, which...
متن کاملPositron Lifetime Measurements of Subsurface Region in Aluminium Alloy and Aluminium Alloy Composite after Dry Sliding
This paper presents positron lifetime studies of the subsurface region of AK12 aluminium alloy and Al2O3-particle-reinforced AK12 aluminium alloy composite after sliding against steel in the pin-on-disc machine. The defect depth profile detected in the AK12 alloy extended up to 300 μm but for the composite AK12 the range of this profile was significantly shortened to less than ∼ 90 μm. The posi...
متن کاملCavitation Erosion of Cermet-Coated Aluminium Bronzes
The cavitation erosion resistance of CuAl10Ni5Fe2.5Mn1 following plasma spraying with Al₂O₃·30(Ni20Al) powder and laser re-melting was analyzed in view of possible improvements of the lifetime of components used in hydraulic environments. The cavitation erosion resistance was substantially improved compared with the one of the base material. The thickness of the re-melted layer was in the range...
متن کاملLaser Welding of Aluminium Alloy 5083
There are two laser welding mechanisms, keyhole mode and conduction mode. Keyhole welding is widely used because it produces welds with high aspect ratios and narrow heat affected zones. However keyhole welding can be unstable, as the keyhole oscillates and closes intermittently. This intermittent closure causes porosity due to gas entrapment. Conduction welding, on the other hand, is more stab...
متن کاملTopology Optimization of Aluminium Alloy Wheel
A great number of wheel tests are required in designing and manufacturing of wheels to meet satisfactory requirements. The impact performance of a wheel is the major concern. Numerical implementation of impact test is essential to shorten the design time, improve the mechanical performance and lower development cost. Project includes the “Topology Optimization of Cast Aluminium Alloy wheel” usi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
سال: 2013
ISSN: 1350-6501,2041-305X
DOI: 10.1177/1350650113485187