EROSION-CORROSION BEHAVIOUR OF 6061 ALUMINIUM ALLOY
نویسندگان
چکیده
منابع مشابه
Mechanical Behaviour and Corrosion of Interstitial-free Steel Aluminium Alloy Self-piercing Riveted Joints
.......................................................................................i-ii ACKNOWLEDGEMENTS...................................................................iii-iv CONTENTS......................................................................................v-vii LIST OF FIGURES...........................................................................viii-xiii LIST OF TABLES....
متن کاملCorrosion Behaviour of NIMONIC-90 Alloy
Investigations were conducted on hot corrosion of Nickel base, NIMONIC-90 at 675°C and 725°C. The tests were carried out on small test coupons coated with a chemical containing Sodium sulphate and Sodium Vanadate which is representative of the corrosive deposit that usually forms during service in the coal fired boiler and the likes operating in marine atmospheres. Corrosion rates were measured...
متن کاملFeasibility study of friction stir welding of 6061-T6 aluminium alloy with AISI 1018 steel
The present work demonstrates that friction stir welding (FSW) is a feasible route for joining 6061 aluminium (Al) alloy to AISI 1018 steel. The weld has a good weld quality and is free of cracks and porosity. The tensile failure happened at the boundary between the nugget and thermomechanically affected zone of the base Al alloy, indicating that the weld has a higher joining strength. Despite ...
متن کاملStudies of Corrosion of Aluminium and 6063 Aluminium Alloy in Phosphoric Acid Medium
The corrosion behaviour of aluminium and6063 aluminium alloy was investigated in phosphoric acid of different concentrations at different temperatures. The study was done by electrochemical method, using Tafel polarization and electrochemical impedance spectroscopy (EIS) techniques. The kinetic parameters and thermodynamic parameters were calculated using Arrhenius theory and transition state t...
متن کاملEvaluation of Mechanical Properties of Aluminium Alloy AA 6061(HE-20)
The general manufacturing objective during the fabrication of automotive, structural and aerospace components, particularly through flow forming process is to achieve predefined product quality characteristics and mechanical properties with process cost and time constraints. The current state of the economy and the consequent market pressure has forced vehicle manufacturers to simultaneously re...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ERJ. Engineering Research Journal
سال: 2004
ISSN: 1110-1180
DOI: 10.21608/erjm.2004.82600