Equation to predict maximum pipe stress incorporating internal and external loadings on buried pipes
نویسندگان
چکیده
منابع مشابه
Experimental Study of the Residual Stresses in Girth Weld of Natural Gas Transmission Pipeline
In order to achieve integrated condition in the girth welding of high pressure natural gas transmission pipelines, the weld zones and its surrounding area should have good mechanical properties. Residual stresses are an important defect especially in the girth welding of the pipeline. In this study, two API X70 steel pipes (with spiral seam weld) of 56 inches outside diameter and 0.780 inch wal...
متن کاملSoil-Structure Interaction of Buried Pipes Under Cyclic Loading Conditions
The safety of lifelines, as the most important urban facilities, under different conditions highly depends on the safe design and performance of these buried structures. This cannot be achieved unless their actual behaviors are well understood and considered at the designing stage. A new physical model was developed in Amirkabir University of Technology to study the behavior of buried pipes und...
متن کاملStress-strain Response Modelling of Glass Fibre Reinforced Epoxy Composite Pipes under Multiaxial Loadings
This paper presents the modelling of stress strain response of glass fibre reinforced epoxy (GRE) composite pipes subjected to multiaxial loadings at room temperature (RT). This particular modelling work was developed to predict the non-linear stress strain response caused by the fatigue cyclic and static loading in the multiaxial ultimate elastic wall stress (UEWS) tests by considering the eff...
متن کاملStiffness modeling for perfect and non-perfect parallel manipulators under internal and external loadings
The paper presents an advanced stiffness modeling technique for perfect and non-perfect parallel manipulators under internal and external loadings. Particular attention is paid to the manipulators composed of non-perfect serial chains, whose geometrical parameters differ from the nominal ones and do not allow to assemble manipulator without internal stresses that considerably affect the stiffne...
متن کاملEffects of Pipe Curvature and Internal Pressure on Stiffness and Buckling Phenomenon of Circular Thin-Walled Pipes
A parametric study on circular thin-walled pipes subjected to pure bending is performed. Both straight and curved pipes are considered. Ratio D/t, initial pipe curvature and internal pressure are the parameters varying in the analyses. The study is mainly FEA-based. It is found that negative curvatures (opposite to bending moment) considerably increase stiffness and buckling limit of the pipe w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Canadian Geotechnical Journal
سال: 2016
ISSN: 0008-3674,1208-6010
DOI: 10.1139/cgj-2015-0500