Equal-Channel Angular Pressing(ECAP): A Novel Method for Microstructural Control.

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Size effect in equal channel angular pressing (ECAP) process

The influence of the sample size (diameter while keeping the length constant) in equal channel angular pressing (ECAP) of pure aluminum is examined using finite element method (FEM) and experiment. Different sized aluminum rods were processed via ECAP and the effect of sample size on the strain homogeneity, process load, and the ratio of the friction to the total force were evaluated. The resul...

متن کامل

Re-strengthening in AA6063 Alloy During Equal Channel Angular Pressing

Equal channel angular pressing (ECAP) is carried out using two different configurations for the exit channel of the ECAP die, i.e., relieved and choked, with angles of 0.2 °. It is found that using a die with relieved exit channel, the sample was extruded for 6 passes with no surface cracks and an average cell size of 727 nm and a fraction of high angle grain boundaries of 54 % were achieved. M...

متن کامل

Microstructural evolution in a spray-cast aluminum alloy during equal-channel angular pressing

A spray-cast Al-7034 alloy was processed by equal-channel angular pressing (ECAP) to a total of 8 passes at 473 K and the pressed samples were examined using transmission electron microscopy, differential scanning calorimetry and electron back-scatter diffraction. It is shown that the grain size of the alloy is reduced to ~0.3 μm by ECAP and the high pressures associated with ECAP lead to a fra...

متن کامل

Modeling and production of high strength Al strips by equal channel multi angular pressing method

Equal channel multi angular pressing (ECMAP) process is the efficient method to enhance the productivity of ultra-fine grained (UFG) materials, by increasing process continuity and as a result decreasing process required time. Comparing repetitive ECAP method, in the same period, the number of passes can be done by ECMAP. In this article, ECMAP of AL strips in two typical annealed and as receiv...

متن کامل

Parameter Analysis and optimization of equal channel angular pressing extrusion for titanium alloy using Taguchi design of experiments method

In this paper the influence of different parameters on equal channel angular pressing (EADAP) of titanium alloy is investigated. In the first step the most important parameters are selected, and then a table of experiments is designed using Taguchi method. After designing the table of experiments, all of the experiments are simulated using Abacus software and the results are optimized using Tag...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Materia Japan

سال: 1998

ISSN: 1340-2625,1884-5843

DOI: 10.2320/materia.37.767