Epoxy-coated Reinforcing Steel Bars and Stainless Steel Bars
نویسندگان
چکیده
منابع مشابه
Improving the Development Characteristics of Steel Reinforcing Bars
The bond characteristics of deformed reinforcing bars are investigated ctnd design equations for development and splice lengths are obtained with the goal of improving the bond strength of steel reinforcing bars to concrete. The research includes both experimental and analytical studies. The experimental studies involved evaluating the performance of deformed steel reinforcing bars with differe...
متن کاملNonlinear Uniaxial Material Model for Reinforcing Steel Bars
Recent advances in nonlinear analysis of reinforced concrete structures have been based primarily on fiber-based discretization of the member cross section at locations of expected inelastic action. However, the accuracy of a fiber-section model is almost entirely dependent on the ability of constitutive material models to represent the overall inelastic behavior of the member. The postyield re...
متن کاملEvaluation of Properties of Steel Reinforcing Bars for Seismic Design
Capacity design procedure for the earthquake-resistant reinforced concrete (RC) structures is effective when actual member capacities do not greatly exceed the assumed design capacities. Moreover, RC members are expected to undergo large inelastic deformations for adequate seismic energy dissipation. Since flexural capacity and post-yield behavior of an RC member is largely controlled by steel ...
متن کاملFatigue of Reinforcing Steel Bars Subjected to Natural Corrosion
Under badly environmental conditions as well as complex loads, corrosion of embedded reinforcing steel bars in concrete is common for reinforced concrete (RC) structures. Fatigue of corrosion reinforcing steel bars is a key problem for old RC bridges. To assess the residual fatigue life of aged existing RC bridges, the most new study information on fatigue of natural corrosion reinforcement is ...
متن کامل08323 - Cathodic Behavior of Stainless Steel 316LN Reinforcing Bars In Simulated Concrete Pore Solutions
The high corrosion resistance of stainless steel (SS) reinforcing bars is widely recognized. However, little information is available on how much cathodic current a passive SS rebar assembly could produce to support a local anode as corrosion eventually starts. The ability of SS to perform as a cathode would have a direct impact on the corrosion rate of the anodic region. To address this issue,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Concrete Journal
سال: 2011
ISSN: 0387-1061,2186-2753
DOI: 10.3151/coj.49.5_78