Epoxies for Component Mounting in Thick Film Hybrids

Thick-film Actuation Technologies for Mems Applications

⎯ This paper compares two thick-film actuation technologies and assesses their suitability for use within micromachined devices. The materials are a piezoelectric composition, which exhibits a d33 coefficient of the order of 130pC/N, and a magnetostrictive material which possess a magnetostriction of 4.4ppm at a magnetic field of 11.5kA/m. Examples of their application in micromachined devices ...

Thick Film Ni-Ferrite Inductors

Equilibrium helium film in the thick film limit

For the thickness 0 5 a liquid or solid quantum f i lm, like liquid helium or solid hydrogen, there exist still open questions about how the film thickness develops in certain limits. One of these is the thick film limit, i.e., the crossover from the thick film to bulk. We have performed rneasurements in this range using the surface plasmon resonance technique and an evaporated h g film deposit...

Thick-film Piezoceramic Micro-generators

A sensor node is generally small in physical size (typically a few cm or smaller) and consist of a sensor, a transceiver, and supporting electronics. They are connected as a wireless network and are sometimes isolated and embedded in structures, which are not easily accessible. The lifespan of the sensor node is critically dependent upon the power source it contains. Instead of using a limited ...

Microvaristors in thick-film and LTCC circuits

ZnO-based varistors protect electronic circuits against overvoltage. High temperature from the range of 1150–1300 C is required for proper sintering of such material. Varistor inks with lower firing temperature are needed for application in thick-film and LTCC technology. ZnO-based thick-film composition was prepared and varistors were fabricated on alumina and LTCC substrate. Different topolog...