EPMA Studies of a New Ceramic Material for Machining Titanium Alloys
نویسندگان
چکیده
منابع مشابه
A Review on High-Speed Machining of Titanium Alloys∗
Titanium alloys have been widely used in the aerospace, biomedical and automotive industries because of their good strength-to-weight ratio and superior corrosion resistance. However, it is very difficult to machine them due to their poor machinability. When machining titanium alloys with conventional tools, the tool wear rate progresses rapidly, and it is generally difficult to achieve a cutti...
متن کاملOn High Speed Machining of Titanium Alloys - Analysis and Validation
III ABSTRACT This report documents the steps taken to gain insight into the phenomena of high speed machining (HSM) of titanium alloys. This was done by firstly studying titanium alloys and the problems associated with machining titanium alloys. An experimental set-up and procedure was developed for measuring and recording both the machining temperature and component forces. A sufficient set of...
متن کاملOptimization of Wire Electric Discharge Machining Process Parameters Using Titanium Alloys –A Review
WEDM is one of the important variants of electrical discharge machining (EDM) which uses the thermal energy generated between the electrodes for machining the electrically conducive materials. This method has been successfully implemented in common materials like aluminum, stainless steel etc., But its application in super alloys like Ti6Al4V is still under investigations. This paper reviews th...
متن کاملTitanium Alloys
Although originally discovered in the 18th century [1], the titanium industry did not experience any significant advancement until the middle of the 20th century through the development of the gas turbine engine [2]. Since then, the aerospace sector has dominated worldwide titanium use with applications in both engines and airframe structures [3]. The highly desirable combination of properties,...
متن کاملGallium platinum alloys – a new material system for UV plasmonics
We describe a new material system based on alloys of gallium and platinum that is well-suited for ultraviolet (UV) plasmonics. Although gallium has previously been shown to be useful for such studies, creating a continuous, pinhole-free thin film has been technically challenging. For example, when vacuum deposition techniques are used, gallium forms as isolated spherical nanoparticles on a wide...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2003
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s143192760344347x