Epitaxial Growth of Cadmium Sulphide Films

Epitaxial growth of thin films

The term ‘epitaxial’ is applied to a film grown on top of the crystalline substrate in ordered fashion that atomic arrangement of the film accepts crystallographic structure of the substrate. Epitaxial growth is one of the most important techniques to fabricate various ‘state of the art’ electronic and optical devices. Modern devices require very sophisticated structure, which are composed of t...

Epitaxial Growth of Thin Films

This chapter gives an introduction to the epitaxial growth of thin films on solid substrates. The term epitaxy refers to the growth of a crystalline layer on (epi) the surface of a crystalline substrate, where the crystallographic orientation of the substrate surface imposes a crystalline order (taxis) onto the thin film. This implies that film elements can be grown, up to a certain thickness, ...

MOCVD growth of non-epitaxial and epitaxial ZnS thin films

Thin films of ZnS have been deposited by MOCVD on both BaTa206/ITO/glass and Si substrates. Diethylzinc (DEZn) and H2S are used for deposition on substrates heated to the 250-400°C temperature range. The microstructure and properties of ZnS films were studied by X-ray diffractometry (XRD), ultraviolet/visible spectrophotometry (UVS) and scanning electron microscopy (SEM). Films prepared on BaTa...

The influence of sulphide transport on the growth and properties of copper sulphide films on copper

Ultraviolet detectors based on annealed zinc oxide thin films: epitaxial growth and physical characterizations

In this report, ultraviolet (UV) detectors were fabricated based on zinc oxide thin films. The epitaxial growth of zinc oxide thin films was carried out on bare glass substrate with preferred orientation to (002) plane of wurtzite structure through radio frequency sputtering technique. The structural properties indicated a dominant peak at 2θ=34.28º which was matched with JCPDS reference card N...