Epitaxial deposition of nickel-based superalloy René 142 through scanning laser epitaxy (SLE)
نویسندگان
چکیده
منابع مشابه
Laser Cladding of Ultra-Thin Nickel-Based Superalloy Sheets
Laser cladding is a well-established process to apply coatings on metals. However, on substrates considerably thinner than 1 mm it is only rarely described in the literature. In this work 200 µm thin sheets of nickel-based superalloy 718 are coated with a powder of a cobalt-based alloy, Co-28Cr-9W-1.5Si, by laser cladding. The process window is very narrow, therefore, a precisely controlled Yb ...
متن کاملAnalysis of Cracks in the Pulsed Nd:YAG Laser Welded Joint of Nickel-Based Superalloy
The weldability of GTD-111 nickel-based superalloy by pulsed Nd:YAG laser welding with an average power of 250 W was studied, and the microstructural evolution and cracking characteristics were also investigated. The solidification cracking of the fusion zone (FZ) and the intergranular liquation cracking in the heat affected zone (HAZ) were observed in the joint. Solidification cracking was cau...
متن کاملPulsed Laser Deposition and Epitaxy
Laser is a powerful tool in many applications. It is especially useful in material processing. Thanks to it's narrow frequency bandwidth, coherence and high power density this instrument is used in many scientific research works and experiments. Often the light beam is intense enough to vaporize the hardest and most heat resistant materials. Besides, due to its high precision, reliability and s...
متن کاملMonte Carlo simulations of epitaxial growth: comparison of pulsed laser deposition and molecular beam epitaxy
The influence of epitaxial growth method on surface morphology was explored using a solid-on-solid, rate equation, Ž . Ž . Monte Carlo simulation whose parameters were chosen to approximate 1=1 Si 001 . In simulations corresponding to molecular beam epitaxy, films of 10 monolayer thickness were deposited with a steady-state flux of 0.25 monolayersrs and an adatom energy of 0.3 eV. In simulation...
متن کاملA synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy
Laser additive forming is considered to be one of the promising techniques to repair single crystal Ni-based superalloy parts to extend their life and reduce the cost. Preservation of the single crystalline nature and prevention of thermal mechanical failure are two of the most essential issues for the application of this technique. Here we employ synchrotron X-ray microdiffraction to evaluate ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Additive Manufacturing
سال: 2018
ISSN: 2214-8604
DOI: 10.1016/j.addma.2018.06.014