Epitaxial Crystallization of Linear Polyethylene in Blends with Isotactic Polypropylene
نویسندگان
چکیده
منابع مشابه
Extensional-flow-induced crystallization of isotactic polypropylene
A filament stretching extensional rheometer with a custom-built oven was used to investigate the effect of uniaxial flow on the crystallization of polypropylene. Prior to stretching, samples were heated to a temperature well above the melt temperature to erase their thermal and mechanical histories and the Janeschitz-Kriegl protocol was applied. The samples were stretched at extension rates in ...
متن کاملHigh-pressure crystallization of isotactic polypropylene droplets
Dispersions of isotactic polypropylene (PP) particles in polystyrene (PS) were produced by interfacially driven breakup of nanolayers in multilayered systems that were fabricated by means of layer-multiplying coextrusion. The droplet size was controlled by the individual PP layer thickness ranging from 12 to 200 nm. In addition, PP was melt blended with PS to produce PP droplets larger than tho...
متن کاملCharacterization of polypropylene–polyethylene blends by temperature rising elution and crystallization analysis fractionation
The introduction of single-site catalysts in the polyolefins industry opens new routes to design resins with improved performance through multicatalyst-multireactor processes. Physical combination of various polyolefin types in a secondary extrusion process is also a common practice to achieve new products with improved properties. The new resins have complex structures, especially in terms of ...
متن کاملTensile and impact behavior of polypropylene/low density polyethylene blends
Blends of polypropylene (PP) and low-density polyethylene (LDPE) may contribute to make recycling more economically attractive. The aim of this work was to make PP/LDPE blends (0/100, 25/75, 50/50, 75/25 and 100/0 w/w) via injection molding carried out under various injection temperatures and to evaluate their tensile and impact properties. The blends yielded tensile stress–strain curves very d...
متن کاملDetermination of percent polyethylene in polyethylene/polypropylene blends using cast film FTIR techniques
Polyethylene (PE) is the most common group of thermoplastic polymers due to its low cost and versatile physical properties. PE is blended with polypropylene (PP) to improve physical properties, such as low temperature impact performance. The composition of these blends is important with regard to performance, and the correct mixing of the pure homopolymers (PE and PP) can eliminate the need for...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Macromolecular Science, Part B
سال: 2013
ISSN: 0022-2348,1525-609X
DOI: 10.1080/00222348.2013.808522