Environmentally conscious machining of Inconel 718: surface roughness, tool wear, and material removal rate assessment
نویسندگان
چکیده
منابع مشابه
Investigation of Electric Discharge Machining of Inconel 718 Using Special Graphite Electrode
Electric Discharge Machining is a non-conventional machining process, used to machining difficult to machine materials. The major problem faced while doing EDM is high tool wear rate, end wear, corner wear , surface roughness and low material removal rate,. In this research work experimental investigations have been made to find the machining characteristics of high density ultra fine graphite ...
متن کاملAnalysis of Surface Roughness and Material Removal Rate in Dry and Cryogenic Machining of En31 Steel
Production rates play important role in the turnover of any industry. In order to increase the production rates, industrial processes are need to be speedup by speeding input parameters such as cutting speeds, feed rates etc. But with the higher speeds and feeds the heat generation also increases between tool-chip, tool and work piece interfaces, which reduce the tool life, product quality and ...
متن کاملEffect of Cutting Parameters on Tool Wear, Surface Roughness and Material Removal Rate During Dry Turning of EN-31 Steel
ISBN 978-93-82338-21-5 | © 2012 Bonfring Abstract--The present paper is an experimental study to investigate the effect of cutting parameters (cutting speed, depth of cut and feed) on tool wear, surface roughness and material removal rate (MRR) during dry turning of EN-31 steel. Turning experiments were conducted with cutting speeds: 250, 300, 350 m/min, feeds: 0.15, 0.2, 0.25 mm/rev and depth ...
متن کاملComparative Neural Network Models on Material Removal Rate and surface Roughness in Electrical Discharge Machining
Electro-discharge machining (EDM) is increasingly being used in many industries for producing molds and dies, and machining complex shapes with material such as steel, cemented carbide, and engineering ceramics. The stochastic nature of EDM process has frustrated number of attempts to model it physically. Artificial neural networks (ANNs), as one of the most attractive branches in Artificial In...
متن کاملAssessment of Surface Roughness and Material Removal Rate on Machining of TIB2 Reinforced Aluminum 6063 Composites: A Taguchi’s Approach
The utilization of TiB2 particles reinforced aluminum (Al6063) metal matrix composite materials in many different engineering fields has undergone a tremendous increase. Accordingly, the need of accurate machining of composites has increased enormously; an attempt has been made to assess the factors influencing surface roughness and material removal rate on machining the composite. The orthogon...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The International Journal of Advanced Manufacturing Technology
سال: 2019
ISSN: 0268-3768,1433-3015
DOI: 10.1007/s00170-019-04550-z