Environmental degradation of foamed geopolymers
نویسندگان
چکیده
Abstract Modern materials used in civil engineering should fulfill the numerous of requirements connected building standards, but not only. They also be ecological and durable. Geopolymers are characterized by very good mechanical properties, high resistance against acids, chlorides sulfates, thermal resistance, other properties confirmed previous research. There is still a few amount research with this for different environmental conditions, especially lack investigation foamed geopolymers area. The main objective article to analyze possibilities development new geopolymer composites increase durability, degradation corrosive water environments. This paper presents influence on environment. As raw materials, fly ash from coal power plant ‘Skawina’ (located in: Skawina, Lesser Poland, Poland) metakaolin (Czech Republic) were used. chemical composition typical class F. Additionally, reinforced flax fiber. Solid foam samples prepared. foaming agent, hydrogen peroxide (H $$_{2}$$ 2 O $$_{2})$$ ) was applied. following methods applied: compressive strength, flexural porosity measurements, absorption fresh salt water. results show that, however, conditions have significant composites; can successfully produced addition natural fibers strength parameters even after long-term use (materials tested 360 days).
منابع مشابه
Cometabolic degradation of TCE vapors in a foamed emulsion bioreactor.
Effective cometabolic biodegradation of trichloroethylene (TCE) vapors in a novel gas-phase bioreactor called the foamed emulsion bioreactor (FEBR) was demonstrated. Toluene vapors were used as the primary growth substrate for Burkholderia cepacia G4 which cometabolically biodegraded TCE. Batch operation of the reactor with respect to the liquid feed showed a drastic decrease of TCE and toluene...
متن کاملTiO2-Based Photocatalytic Geopolymers for Nitric Oxide Degradation
This study presents an experimental overview for the development of photocatalytic materials based on geopolymer binders as catalyst support matrices. Particularly, geopolymer matrices obtained from different solid precursors (fly ash and metakaolin), composite systems (siloxane-hybrid, foamed hybrid), and curing temperatures (room temperature and 60 °C) were investigated for the same photocata...
متن کاملThermal Resistance Variations of Fly Ash Geopolymers: Foaming Responses
This paper presents a comparative study of the characteristic of unfoamed and foamed geopolymers after exposure to elevated temperatures (200-800 °C). Unfoamed geopolymers were produced with Class F fly ash and sodium hydroxide and liquid sodium silicate. Porous geopolymers were prepared by foaming with hydrogen peroxide. Unfoamed geopolymers possessed excellent strength of 44.2 MPa and degrade...
متن کاملModeling the Formation of Geopolymers
Geopolymers are a class of X-ray amorphous alkali aluminosilicate gel binder materials with potential applications in a wide range of areas. In particular, geopolymers can provide significant improvements over traditional Portland cement technology in applications requiring resistance to acid or salt attack, or thermal stability at temperatures up to 1000°C. The quasi-zeolitic nature of some of...
متن کاملThermal Degradation of Foamed Polymethyl Methacrylate in the Expendable Pattern Casting Process
The thermal degradation of foamed polymethyl methacrylate (PMMA) patterns in the expendable pattern casting process has been studied. Various physical transitions that may occur during the degradation of PMMA have been determined using scanning electron microscopy, differential scanning calorimetry, and thermogravimetric analysis, and the effects of polymer density on the degradation characteri...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Continuum Mechanics and Thermodynamics
سال: 2022
ISSN: ['0935-1175', '1432-0959']
DOI: https://doi.org/10.1007/s00161-022-01102-x