Enhancement of SNUF Active Trailing-edge Flap Blade Mechanism Design
نویسندگان
چکیده
منابع مشابه
Simulating Cooling Injection Effect of Trailing Edge of Gas Turbine Blade on Surface Mach Number Distribution of Blade
In this research, a gas turbine blade cascade was investigated. Flow analysis around the blade was conducted using RSM and RNG.K-ε turbulence modeling and it is simulated by Fluent software. The results were considered for the cases as Mach number loss at the trailing edge of blade caused by vortexes that were generated at the end of blade. Effect of cooling flow through the trailing edge on th...
متن کاملTrailing Edge Noise Computation of a Fan Blade Profile
Julien Christophe, Stéphane Moreau, Jérome Anthoine 1 von Karman Institute for Fluid Dynamics, 72 Chaussée de Waterloo, 1640 Rhode-St-Genèse, Belgium, [email protected] 2 Université de Sherbrooke, 2500 Boulevard de l’Université, Sherbrooke, J1K 2R1 Québec, Canada, [email protected] 3 ONERA The French Aerospace Lab, Midi-Pyrenees Center, Mauzac, France, Jerome.Anthoine@one...
متن کاملMorphing Trailing Edge Flap for High Lift Wing
This paper presents the study conducted to design and analyze a morphing trailing edge flap structure for a large aircraft wing. The rear part of the trailing edge flap was modified to be integrated with a set of internal actuation mechanisms distributed along the span of the flap. Additional changes to the conventional flap structure were implemented, such as an open sliding trailing edge and ...
متن کاملMechanism of retraction of the trailing edge during fibroblast movement
Retraction of the taut, trailing portion of a moving chick heart fibroblast in vitro is an abrupt dynamic process. Upon retraction, the fibroblast tail always ruptures, leaving a small amount of itself attached to the substratum by focal contacts. Time-lapse cinemicrography shows that retraction produces a sudden, massive movement of both surface and cytoplasmic material toward a cluster of foc...
متن کاملModel Predictive Control of Trailing Edge Flaps on a Wind Turbine Blade
Trailing Edge Flaps on wind turbine blades have been studied in order to achieve fatigue load reduction on the turbine components. We show in this paper how Model Predictive Control can be used to do frequency weighted control of the trailing edge flaps in order to reduce fatigue damage on the blade root. The design model is based on a modal model of the blade structure and a steady state aerod...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Korean Society for Noise and Vibration Engineering
سال: 2013
ISSN: 1598-2785
DOI: 10.5050/ksnve.2013.23.7.645