ENHANCEMENT OF RATE OF HEAT TRANSFER USING VORTEX GENERATORS IN AIR HEATER
نویسندگان
چکیده
منابع مشابه
Air-side heat transfer enhancement of a refrigerator evaporator using vortex generation
In most domestic and commercial refrigeration systems, frost forms on the air-side surface of the air-to-refrigerant heat exchanger. Frost-tolerant designs typically employ a large fin spacing in order to delay the need for a defrost cycle. Unfortunately, this approach does not allow for a very high air-side heat transfer coefficient, and the performance of these heat exchangers is often air-si...
متن کاملEnhancement of heat transfer coefficient using Diamond shaped roughness on the absorber plate of solar air heater
Solar collector (Air heater) has low thermal efficiency due to the low thermal conductivity between Air and absorber plate. So there is a need to enhance the thermal conductivity between air and absorber plate. This leads higher temperature to absorber plate and hence maximum thermal losses occurs to environment .It can be made possible by creating artificial roughness on absorber plate .There ...
متن کاملEnhancement of Natural Convection Heat Transfer in Annular Enclosures
Natural convection heat transfer was investigated experimentally in a concentric-cylinders annulus. To enhance the rate of heat transfer, pin fins were installed on the surface of the inner cylinder. Two fin arrangements were employed, namely, staggered and in-line arrangements. The length of the fins varied from 2 to 8 cm and the Rayleigh number Ra changed in the range from 5 x 105 to 5 x 106...
متن کاملExperimental Study of Heat Transfer Rate in a Shell and Tube Heat Exchanger with Air Bubble Injection (TECHNICAL NOTE)
Shell and tube heat exchangers are widely being used in many of industrial and power engineering applications. Different techniques have been employed in order to enhance the performance of the heat exchanger. Air bubble injection is one method to increase the turbulence of the flowing fluids which in turn enhance the heat transfer performance. Injecting air bubbles is one of the promising tech...
متن کاملHeat transfer enhancement due to air bubble injection into a horizontal double pipe heat exchanger
If an air flow is injected into a liquid fluid, many ambulant air bubbles are formed inside the fluid. Air bubbles move inside the liquid fluid because of the buoyancy force, and the mobility of these air bubbles makes sizable commixture and turbulence inside the fluid. This mechanism was employed to enhance the heat transfer rate of a horizontal double pipe heat exchanger in this paper. Howeve...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Research in Engineering and Technology
سال: 2016
ISSN: 2321-7308,2319-1163
DOI: 10.15623/ijret.2016.0516073