Enhancement of Plate-Fin Heat Exchanger Performance with Aid of (RWP) Vortex Generator
نویسندگان
چکیده
منابع مشابه
Analysis of Gasketed-plate Heat Exchanger Performance Using Nanofluid
A heat exchanger using nanofluid needs to operate at optimum mass concentration level to get the maximum heat transfer performance. A numerical analysis is performed on the heat transfer and pressure drop of water-based γ-Al2O3 nanofluid gasketed-plate heat exchanger to specify its optimum conditions. Cold water will be heated by γ-Al2O3/water nanofluid. The results showed that optimal volume c...
متن کاملAnalysis of Heat Transfer Enhancement in Spiral Plate Heat Exchanger
In the present study, the heat transfer coefficients of benzene in a spiral plate heat exchanger are investigated. The test section consists of a Plate of width 0.3150 m, thickness 0.001 m and Mean hydraulic diameter of 0.01 m. The mass flow rate of water (Hot fluid) is varying from 0.5 kg sec to 0.8 kg sec and the mass flow rate of benzene (cold fluid) varies from 0.4 kg sec to 0.7 kg sec. Exp...
متن کاملEntropy minimization in Plate-fin heat exchanger using Cuckoo Algorithm
One of the key stages in designing a heat exchanger is optimization process. The enhancement in thermal performance results in a rise in pressure drop and total annual costs. So, finding optimal dimensions of heat exchanger is a key stage in designing process. In this paper, optimization has been done based on entropy generation minimization, where Cuckoo Algorithm aided to reach better results...
متن کاملEnhancement of Round Tube and Flat Tube-Louver Fin Heat Exchanger Performance Using Deluge Water Cooling
An experimental study has been conducted to evaluate the performance of a compact round-tube louver-fin condenser, each with frontal areas of 0.25 m in both dry and wet conditions. Deluge water cooling is achieved by incorporating a perforated bottom plate-type water distributor on top of the round tube heat exchanger. Water is used as a refrigerant, and enters the heat exchanger tubes at 35°C ...
متن کاملEffective Heat Transfer Enhancement in Finned Tube Heat Exchanger with Different Fin Profiles
During cross flow in a heat exchanger, heat transfer in the front portion of the tube is more compared to back portion of the tube. This is due to less formation of vortices at the backside of the tube. For uniform heat transfer to take place throughout the tube, it is necessary to increase the vortex formation at the rear side of the tube. The aim of this study is to explore the possibilities ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Heat and Technology
سال: 2023
ISSN: ['0392-8764']
DOI: https://doi.org/10.18280/ijht.410336