Enhancement of MIG Welding Process Parameter using Activated Flux on MS E34 by Taguchi Technique
نویسندگان
چکیده
منابع مشابه
Parametric Optimization of MIG Welding for MS 5986 Fe 410 using Taguchi Method
The aim of this study is to investigate the optimization process parameters for Metal inert gas welding (MIG). In the present work, bead-on -plate welds were carried out on MS 5986 Fe 410 carbon steel sheets using Gas Metal Arc Welding (GMAW) process. In this present investigation ER70S-6 solid wire having 1.2 mm diameter was used as an electrode with direct current electrode positive polarity....
متن کاملWelding Parameter Optimization of Alloy Material by Friction Stir Welding using Taguchi Approach
Friction stir welding is used as a solid state joining process for soft materials such as aluminium alloys and also for hard materials like steels. It avoids many of the common problems obtained in fusion welding. In mechanical, civil, automobile, naval, and aeronautical engineering beams are widely used of the magnesium alloys for different applications and that are joined by conventional iner...
متن کاملEffect of Activated Flux on Properties of SS 304 Using TIG Welding
In this experimental work, Manganese oxide (MnO2), Zinc oxide (ZnO), Iron oxide (Fe2O3) and Magnesium chloride (MgCl2) were used as activating flux to investigate the effects for SS 304 in tungsten inert gas (TIG) welding. Ultimate tensile strength, percentage elongation, Penetration depth and width were studied of material SS 304. The experimental results indicated that the MnO2 and Fe2O3 flux...
متن کاملSoftware Quality Enhancement Through Software Process Optimization Using Taguchi Methods
This paper presents a methodology for selection of optimal softu’are design parameters using the experimental design. When an organization is at the point of taking up a new project with an objective of improving the software quality, Taguchi method is appliedfor the software design process with an objective that not more than one error is found per software module. The strategy in robust desig...
متن کاملA Review on Optimizing Process Parameters for TIG Welding using Taguchi Method & Grey Relational Analysis
Gas tungsten arc welding (GTAW) or Tungsten inert gas welding (TIG) is one of the widely used techniques for joining ferrous and non-ferrous metal.Gas tungsten arc welding process,consist of non-consumable tungsten electrode which is used to provide the arc for welding. During the welding cycle a shield of inert gas expels the air from the welding area and prevents oxidation of the electrode, w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2020
ISSN: 2321-9653
DOI: 10.22214/ijraset.2020.32047