Enhancement of Feed Gas Distribution of Heterogeneous Catalytic Fixed-bed Reactor
نویسندگان
چکیده
منابع مشابه
CFD Modeling of the Feed Distribution System of a Gas-Solid Reactor
Granular flow simulation using CFD has received a lot of attention in recent years. In such cases, CFD is either, coupled with Discrete Element Method (DEM) techniques for appropriate incorporation of inter-particle collisions, or the Eulerian CFD approach is used in which granular particles are treated as they were fluid. In the present study, a CFD analysis was performed...
متن کاملModeling and Simulation a Catalytic Fixed Bed Reactor to Produce Ethyl Benzene from Ethanol
Ethyl benzene used increasingly each year is the raw material of producing styrene monomer. This substanceis produced from benzene alkylation with ethylene or ethanol, depending on the availability and cost of rawmaterials. In this study benzene alkylation in the presence of ethanol in a catalytic fixed bed reactor inthree states of isotherm, adiabatic and non-isotherm-non-adiabatic is mathemat...
متن کاملThermal Distribution in Axial-Flow Fixed Bed with Flowing Gas
This paper reported an experimental research of steady-state heat transfer behaviour of a gas flowing through a fixed bed under the different operating conditions. Studies had been carried out in a fixed-bed packed methanol synthesis catalyst percolated by air at appropriate flow rate. Both radial and axial direction temperature distribution had been investigated under the different operating c...
متن کاملDesign of an automated fixed bed reactor used for a catalytic wet oxidation process
Treatment of polluted industrial wastes is one of the challenging research topics that occupy an important position in various chemical processes. Wet Air Oxidation (WAO) is one of the emerging processes suited for the treatment of special aqueous wastes. The system consists of an oxidation in the liquid phase of the organic matter by molecular oxygen at high temperature (200-325°C) and high pr...
متن کاملSimulation Study of Radial Heat and Mass Transfer Inside a Fixed Bed Catalytic Reactor
A rigorous two-dimensional model is developed for simulating the operation of a less-investigated type steam reformer having a considerably lower operating Reynolds number, higher tube diameter, and non-availability of extra steam in the feed compared with conventional steam reformers. Simulation results show that reasonable predictions can only be achieved when certain correlations for wall to...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KEPCO Journal on Electric Power and Energy
سال: 2016
ISSN: 2465-8111
DOI: 10.18770/kepco.2016.02.04.595