Enhanced wear resistance in AlMgB14–TiB2 composites
نویسندگان
چکیده
منابع مشابه
Wear resistance of Cu – 18 vol . % Nb ( P / M ) composites
Wear resistance of Cu–18 vol.% Nb (P/M) composites H. Nayeb-Hashemi a,∗, A. Vaziri b, K. Ziemer c a Department of Mechanical and Industrial Engineering, Northeastern University, Boston, MA 02115, United States b School of Engineering and Applied Sciences, Harvard University, Cambridge, MA 02138, United States c Department of Chemical Engineering, Northeastern University, Boston, MA 02115, Unite...
متن کاملWear of Aged Dental Composites
Surface morphology and wear characteristics of five dental composites subjected to accelerated aging were investigated. Aging conditions caused degradation of the surface as evidenced by the formation of microcracks and the exposure and loss of filler particles. Wear parameters such as track width, transition load and mode of surface failure caused by single-pass sliding were influenced by agin...
متن کاملThree-body wear of different composites resins
Introduction: Low resistance of composite resins to abrasion is a primary concern in the application of these materials for posterior restorations which are prone to high occlusal loads. This study compared the wear resistance of three types of composites. Methods: In this laboratory experiment, five specimens of each of the three types of composites (z250, Heliomolar, Opallis) were prepared...
متن کاملMechanical Properties and Wear Resistance of Sulfonated Graphene/Waterborne Polyurethane Composites Prepared by In Situ Method
In order to improve the dispensability of graphene oxide (GO) in waterborne polyurethane (WPU), sulfonated graphene (SGO) with superior dispersity was prepared by modifying graphene oxide with sodium 2-chloroethane sulfonate to introduce hydrophilic sulfonic groups into the structure. SGO/WPU composites were prepared using isophorone diisocyanate (IPDI), polytetramethylene ether glycol (PTMEG 2...
متن کاملEffect of nanofiller on wear resistance and surface roughness of resin composites.
OBJECTIVE To compare the wear resistance and surface roughness of nanofiller-containing composites and microhybrid composites after simulated wear. METHODS Five microhybrid composites and five nanofiller-containing resin composites were included in the study. Six cylindrical specimens with a diameter of 10 mm and a thickness of 6 mm for each material were prepared. The volume loss, vertical l...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Wear
سال: 2011
ISSN: 0043-1648
DOI: 10.1016/j.wear.2010.11.013