Enhanced Coercivity of Low-Density Barium Hexaferrite Magnets from Paste-Injection Molding

نویسندگان

چکیده

Ceramic–polymer paste-injection molding is demonstrated as a facile fabrication route for barium hexaferrite magnets. Interestingly, these low-density (1.90–2.35 g/cm3) magnets exhibit substantial coercivity of 3868–4002 Oe. When ceramic paste without polymeric additives used, reduced and slightly increased magnetizations are obtained from magnet with the density 2.55 g/cm3. Their also higher than those compactions sol–gel-derived powders. For compact (3.46–3.77 g/cm3), DI water addition results in magnetization but lower dry-pressed Compactions into disk bar give rise to comparable magnetic properties. The morphological characterizations reveal smaller particles leading larger coercivity, shape have less pronounced effect.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of dopants on barium hexaferrite

Samples of Ba1.266Ti2.956 Fe7.6Li0.844O19 hexaferrite have been prepared using anatase and rutile phases of TiO2 by classical ceramic route. A pure sample of Ba Fe12O19 has also been prepared for comparison. The structural, electrical and magnetic characteristics have been studied by XRD, SEM, FTIR, two probe method, hysteresis loop and susceptibility curves. The samples exhibit hexagonal magne...

متن کامل

Injection Molding of Plastics from Agricultural Materials

OBJECTIVE DOE Chicago Operations %ice The objective of this research was to conduct a systematic study to relate injection molding parameters to properties of blends of starch and synthetic polymer. Blends of normal (25 % amylose) and high amylose (50 and 70% amylose) corn starch (containing between 60 and 70 % of the mixture by weight) and synthetic polymer were used in this research. Two diff...

متن کامل

Surfactant-assisted synthesis of Barium hexaferrite nanoparticles by hydrothermal method

In the present work, the synthesis of Barium hexaferrite (BaFe12O19) nanoparticles in thepresence of a large excess amount of OH− anions by the hydrothermal method in the presence and absence of surfactants such as Sodium dodecyl benzene sulfonate and Triton X-114 was reported. The optimized temperature in the absence of surfactant was determined (200 °C) and then Barium hexaferrite nanoparticl...

متن کامل

Surfactant-Assisted Electrodeposition of CoFe-Barium Hexaferrite Nanocomposite Thin Films

The influences of anionic sodium dodecylsulfate (SDS) and cationic Hexadecyltrimethylammonium bromide (HTAB) surfactants on the incorporation and distribution of barium hexaferrite nanoparticles in the electrodeposited CoFe-BaFe12O19 composite thin films were studied. Sulphate bathes with natural pH containing 0 to 2 g/L surfactants were used for electroplating at room temperature. Field emissi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Magnetochemistry

سال: 2022

ISSN: ['2312-7481']

DOI: https://doi.org/10.3390/magnetochemistry8040046