Engineering Properties of Superconducting Materials

architecture and engineering of nanoscale sculptured thin films and determination of their properties

چکیده ندارد.

Mechanical Properties of Engineering Materials

The engineering tension test is widely used to provide basic design information on the strength of materials and as an acceptance test for the specification of materials. In the tension test a specimen is subjected to a continually increasing uniaxial tensile force while simultaneous observations are made of the elongation of the specimen. The parameters, which are used to describe the stress-s...

Superconducting Materials for Magnets

Superconducting materials for magnets will be discussed from three viewpoints: firstly the basic physical properties of the materials themselves, secondly the constraints and preferences imposed by the requirements of magnet building and finally, the manufacture of magnet conductors as a commercial product.

Engineering Properties and Correlation Analysis of Fiber Cementitious Materials

This study focuses on the effect of the amount of silica fume addition and volume fraction of steel fiber on the engineering properties of cementitious materials. Test variables include dosage of silica fume (5% and 10%), water/cement ratio (0.35 and 0.55) and steel fiber dosage (0.5%, 1.0% and 2.0%). The experimental results included: compressive strength, direct tensile strength, splitting te...

Engineering the optical properties of subwavelength devices and materials