Engineering Properties of Clay Soil Stabilized with Tiles Particles

نویسندگان

چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mechanical Properties of Low Plasticity Clay Soil Stabilized with Iron Ore Mine Tailing and Portland Cement

Due to economical and environmental issues, utilization of mineral wastes, e.g. iron ore mine tailing (IOMT), as road materials can be recommended as a sustainable alternative. In the present study, mechanical properties, as well as resistance to freezing and thawing cycles (F-T) of low plasticity clay soil stabilized with different percentages of Portland cement (0, 6, 9, 12 and 15%) and diffe...

متن کامل

Influence of Alumina nano particles addition on the properties of wall tiles containing slag

The use of waste materials and industrial wastes in order to protect the environment and also to reduce costs has been considered. In this study, first, the use of slag, a waste of the steel industry, on the properties of the wall tile body was investigated. For this purpose, different percentages of slag were added to the tile body and physical properties such as density, percentage of shrinka...

متن کامل

Some Mechanical Properties of Cement Stabilized Malaysian Soft Clay

Soft clays are defined as cohesive soil whose water content is higher than its liquid limits. Thus, soil-cement mixing is adopted to improve the ground conditions by enhancing the strength and deformation characteristics of the soft clays. For the above mentioned reasons, a series of laboratory tests were carried out to study some fundamental mechanical properties of cement stabilized soft clay...

متن کامل

Estimating of geotechnical properties of clay soil with dynamic cone penetration (DCP) test

Dynamic cone penetration (DCP) test is used more in pavement design and construction, and less for subsurface geotechnical investigation and clay core dam. In the present article, evaluating geotechnical parameters of Sanandaj’s clay in the western region of Iran using the DCP test was taken into account. Accordingly, 6 trial pits with maximum depths of 15 m were excavated manually in various s...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology

سال: 2019

ISSN: 2321-9653

DOI: 10.22214/ijraset.2019.10102