Engineering performance of reinforced lightweight geopolymer concrete beams produced by ambient curing

Mechanical Behaviour of Geopolymer Concrete under Ambient Curing

Utilisation of fly ash and Ground Granulated Blast Slag as an alternative material in concrete reduces the use of OPC in concrete. Evolution of geopolymer concrete cured at ambient temperature broadens its suitability and applicability to concrete based structures. This paper presents the mix proportions and outcome of an experimental study on the density and compressive strength of geopolymer ...

Lightweight Geopolymer Concrete with EPS Beads

Activation of class F fly ash with the 10 M sodium hydroxide and sodium silicate and its geopolymeric products were analysed under quasi-isothermal mode of DSC, FTIR and TG/DTA techniques. Before adding in concrete, expanded polystyrene beads were prewetted with the styrenebutadienestyrene latex aimed at to improve their bonding with geopolymer. Lightweight mortars/concretes were made from geop...

Behavior of Concrete Beams Reinforced Steel Plates

High Performance Reinforced Concrete Beams made with Sandstone Reactive Aggregates

An investigation on the flexural behaviour of reinforced high performance concrete (HPC) has been conducted. Crushed sandstone known as reactive aggregate was used for both fine and coarse aggregates. In addition, mineral admixtures such as silica fume and fly ash combined with superplasticiser was used. The beams were made with concrete having compressive strength in the range of 74 88 N/mm 2 ...

Behavior of Concrete Beams Reinforced Steel Plates