ENGINEERED WOOD FLOORING WITH A DENSIFIED SURFACE LAYER FOR HEAVY-DUTY USE
نویسندگان
چکیده
منابع مشابه
Engineered Wood Flooring with a Densified Surface Layer for Heavy-duty Use
High-density wood is required in wood flooring, especially in engineered wood flooring (EWF) designed for heavy-duty applications. However, high-density wood resources are limited and their cost is high. A densification treatment makes it possible for lowor moderate-density woods to replace harder species by modifying them into highperformance and high-value products, such as engineered wood fl...
متن کاملSURFACE WETTABILITY OF BRAZILIAN TROPICAL WOOD FLOORING TREATED WITH He PLASMA
This study investigated the effect of plasma treatment on changes of surface wettability of wood flooring from two Brazilian tropical species, Hymenaea spp. (rode locus) and Tabebuia spp. (lapacho). Wood flooring samples were plasma treated at low pressure in a helium atmosphere. Energy level was set at 100 W and four glow discharge times (5, 15, 30 and 45 s) were tested. Changes in wettability...
متن کاملQuantifying in-use PM measurements for heavy duty diesel vehicles.
Heavy duty emissions regulations have recently expanded from the laboratory to include in-use requirements. This paradigm shift to in-use testing has forced the development of portable emissions measurement systems (PEMS) for particulate matter (PM). These PM measurements are not trivial for laboratory work, and are even more complex for in-use testing. This study evaluates five PM PEMS in comp...
متن کاملDesign and analysis of a thermoelectric generator for a heavy-duty vehicle in real road test
Heavy duty vehicles have a great share on fossil fuel consumption and greenhouse gases in the world, while they waste two third of chemical energy of fuel. On the other hand, simplicity and long life of thermoelectric generators (TEGs) are considered more and more to convert thermal energy to electrical one. In this paper a TEG designed in the exhaust system of Renault Midlum 195 Dxi Engine. Th...
متن کاملSelective Catalytic Reduction for Heavy-duty and Light-duty Vehicles
Whereas previous emission limit values could be met by primary engine control measures, the limits for PM and NOx from heavy duty engines in 2008/09 (Euro V) and diesel passenger cars in 2014/15 (Euro 6) represent a challenge for the developers of diesel engines and vehicles. Due to the thermodynamics of the Diesel combustion process, it is difficult to optimise the combustion process for both ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BioResources
سال: 2012
ISSN: 1930-2126
DOI: 10.15376/biores.7.4.5843-5854