Engineered Sulfur-Resistant Catalyst System with an Assisted Regeneration Strategy for Lean-Burn Methane Combustion
نویسندگان
چکیده
منابع مشابه
Experiments and Simulations of Lean Methane Combustion
Computational fluid dynamics simulation of methane combustion using chemical kinetics is studied. Linear least squares data fit to measured concentrations and temperatures is used to modify reaction rate parameters in the Arrhenius rate equation for combustion of methane. The modification of reaction rate parameters influences the result of CFD-simulations to predict combustion at experimental ...
متن کاملEffects of Electric Fields on the Combustion Characteristics of Lean Burn Methane-Air Mixtures
In this work, the effects of the electric fields on the flame propagation and combustion characteristics of lean premixed methane–air mixtures were experimentally investigated in a constant volume chamber. Results show that the flame front is remarkably stretched by the applied electric field, the stretched flame propagation velocity and the average flame propagation velocity are all accelerate...
متن کاملCombustion Optimization in a Hydrogen - Enhanced Lean Burn
Lean operation of spark ignition (SI) automotive engines offers attractive performance incentives. Lowered combustion temperatures inhibit NO, pollutant formation while reduced manifold throttling minimizes pumping losses, leading to higher efficiency. These benefits are offset by the reduced combustion speed of lean mixtures, which can lead to high cycle-to-cycle variation and unacceptable eng...
متن کاملCombined sulfating and non-sulfating support to prevent water and sulfur poisoning of Pd catalysts for methane combustion.
The appropriate combination of titania and silica, sulfating and non-sulfating support, respectively, results in Pd catalysts with improved water and sulfur tolerance in methane combustion. For the first time the catalyst recovers the initial activity after one cycle under lean-burn conditions without additional regenerating treatments.
متن کاملTransient Combustion Modeling of an Oscillating Lean Premixed Methane/air Flame
The main objective of the present study is to demonstrate accurate low frequency transient turbulent combustion modeling. For accurate flame dynamics some improvements were made to the standard TFC combustion model for lean premixed combustion. With use of a 1D laminar flamelet code, predictions have been made for the laminar flame speed and the critical strain rate to improve the TFC (Turbulen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ChemCatChem
سال: 2018
ISSN: 1867-3880
DOI: 10.1002/cctc.201701884