ENGINE TESTING OF RME ADDITIVES
نویسندگان
چکیده
منابع مشابه
Engine Testing Engine Test System
Engine testing involves measurement of rotating speed and torque of the engine by applying load controlled by a dynamometer connected to its output shaft. HORIBA has developed various types of dynamometer for the purpose of engine testing. They are mainly classifi ed into two types; one is absorbing only dynamometer such as hydraulic dynamometers and eddy-current dynamometers, the other is abso...
متن کاملHCCI operation of an optically accessible diesel engine fuelled with RME fuel
Introduction In order to overcome the pollutant emission limitations the use of homogeneous charge compression ignition (HCCI) mode must be considered in direct injection diesel engine using biodiesel fuel. HCCI mode reduces PM and NOx emissions without penalize the performances [1]. This occurs because the combustion develops with low temperature and burns a premixed air/fuel mixture. Biodiese...
متن کاملEffect of water on overbased sulfonate engine oil additives.
The presence and effect of water on calcium carbonate nanoparticles used in engine additives, stabilized with a sulfonate surfactant, is investigated using small-angle neutron scattering, dynamic light scattering, Fourier transform infrared spectroscopy, and rheometry. These techniques provide complementary data that suggests the formation of a layer of water around the core of the particles en...
متن کاملCombustion Characteristics of Compression Ignition Engine Fuelled with Rme and Ethanol
At the previous conference KONES’2004 emission characteristics of C.I. engine fuelled with either rape oil methyl ester (RME) or diesel fuel (DF) as a main fuel and ethanol as additional fuel were presented. Comparison of emission and brake fuel conversion efficiency (BFCF) of the engine fuelled with both main fuels showed that fuelling with RME and ethanol is more advantageous on account of bo...
متن کاملParticle Size Distribution in a Transparent Cr Diesel Engine Fuelled with Rme and Gtl by Means of Multiwavelength Spectroscopy
In this paper, broadband UV–NIR flame emission measurements were performed in an optical Common Rail (CR) diesel engine in order to evaluate the formation process of soot particles with high spatial and temporal resolution. The measurements were carried out in a direct injection (DI) CR transparent research diesel engine equipped of a Euro 5 multi cylinder head. Two alternative fuels, chosen as...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of KONES. Powertrain and Transport
سال: 2015
ISSN: 1231-4005
DOI: 10.5604/12314005.1137867