Energy methods for curved composite beams with partial shear interaction
نویسندگان
چکیده
منابع مشابه
Finite Element Instability Analysis of the Steel Joist of Continuous Composite Beams with Flexible Shear Connectors
Composite steel/concrete beams may buckle in hogging bending regions. As the top flange of I-beam in that arrangement is restricted from any translational deformation and twist, the web will distort during buckling presenting a phenomenon often described as restricted distortional buckling. There are limited studies available in the literature of restricted distortional buckling of composite st...
متن کاملAn improved model for naturally curved and twisted composite beams with closed thin-walled sections
This paper presents an improved model for naturally curved and twisted anisotropic beams with closed thin-walled cross-sections. By introducing eigenwarping functions and expanding axial displacements in series of eigenwarpings, the differential equation involving the generalized warping coordinate and the expression for eigenvalues can be derived using the principle of minimum potential energy...
متن کاملAlgebraic Methods for Creep Analysis of Continuous Composite Beams
This interesting study is similar to the study by Bazant and Najjar (1973) [extensively reviewed in Section 5.5 of Bazant (1975)], which apparently escaped the attention of the authors. However, the conclusion in which the authors recommend the effective modulus method, is different. It appears unwarranted and conflicts with more extensive evidence. The authors dismiss the age-adjusted effectiv...
متن کاملFinite Element Response Sensitivity Analysis of Steel-Concrete Composite Beams with Deformable Shear Connection
The behavior of steel-concrete composite beams is strongly influenced by the type of shear connection between the steel beam and the concrete slab. For accurate analytical predictions, the structural model must account for the interlayer slip between these two components. In numerous engineering applications e.g., in the fields of structural optimization, structural reliability analysis, and fi...
متن کاملBehavior of Steel–Concrete Composite Beams with Corroded Shear Studs Under Negative Bending Moment
The behavior of corroded steel–concrete composite beams under hogging moment was studied by experimental investigation and theoretical analysis. A total of eight specimens, six of which had corroded shear studs, were tested. The corrosion rate of studs ranged from 0 to approximately 50%. The constant-current accelerated corrosion method was adopted to accelerate the corrosion process. The loadi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Curved and Layered Structures
سال: 2015
ISSN: 2353-7396
DOI: 10.1515/cls-2015-0020