Energy Harvesting Assessment Using PZT Sensors and Roadway Materials
نویسندگان
چکیده
منابع مشابه
Energy harvesting using a PZT ceramic multilayer stack
In this paper, the interdisciplinary energy harvesting issues on piezoelectric energy harvesting were investigated using a ‘33’ mode (mechanical stress and/or electric field are in parallel to the polarization direction) lead zirconate titanate multilayer piezoelectric stack (PZT-Stack). Key energy harvesting characteristics including the generated electrical energy/power in the PZT-Stack, the ...
متن کامل1.6 V nanogenerator for mechanical energy harvesting using PZT nanofibers.
Energy harvesting technologies that are engineered to miniature sizes, while still increasing the power delivered to wireless electronics, (1, 2) portable devices, stretchable electronics, (3) and implantable biosensors, (4, 5) are strongly desired. Piezoelectric nanowire- and nanofiber-based generators have potential uses for powering such devices through a conversion of mechanical energy into...
متن کاملSensors for Energy Harvesting System
A considerable attention has been given to the energy harvesting system, as the energy obtained from this system is used for powering up small electronic devices instead of using batteries. Battery manufactures make batteries of required size with long life of usage. However, it is difficult to replace such batteries once its life is expired. This difficulty can be partially overcome by using t...
متن کاملRecent Progress on PZT Based Piezoelectric Energy Harvesting Technologies
Energy harvesting is the most effective way to respond to the energy shortage and to produce sustainable power sources from the surrounding environment. The energy harvesting technology enables scavenging electrical energy from wasted energy sources, which always exist everywhere, such as in heat, fluids, vibrations, etc. In particular, piezoelectric energy harvesting, which uses a direct energ...
متن کاملVibration Energy Harvesting with Pzt Thin Film Micro Device
A micro power generator for harvesting vibration energy by means of a piezoelectric laminated cantilever with inertial mass was designed, fabricated, and characterized. The device was micro machined from a silicon-on-insulator structure coated with a 2μm thick piezoelectric PZT thin film. Interdigitated electrodes (IDE) were applied to achieve higher voltages. A piezoelectric coupling constant ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Thermal and Environmental Engineering
سال: 2018
ISSN: 1923-7308,1923-7308
DOI: 10.5383/ijtee.16.01.003