Energetic sub-2-cycle laser with 216 W average power
نویسندگان
چکیده
منابع مشابه
Femtosecond thin-disk laser with 141 W of average power.
We present a semiconductor saturable absorber mirror mode-locked thin disk laser based on Yb:Lu(2)O(3) with an average power of 141 W and an optical-to-optical efficiency of more than 40%. The ideal soliton pulses have an FWHM duration of 738 fs, an energy of 2.4 microJ, and a corresponding peak power of 2.8 MW. The repetition rate was 60 MHz and the beam was close to the diffraction limit with...
متن کامل40-W average power, 30-Hz moving-slab Nd:glass laser.
A moving-slab-geometry Nd:glass laser has been designed and demonstrated. An average power output of 43.8 W has been achieved at 2.76-kW input power and at 2.06% slope efficiency. The moving-slab laser has the potential for scaling to kilowatt average power levels.
متن کامل500 kHz OPCPA delivering tunable sub-20 fs pulses with 15 W average power based on an all-ytterbium laser.
An optical parametric chirped pulse amplifier fully based on Yb lasers at 500 kHz is described. Passive optical-synchronization is achieved between a fiber laser-pumped white-light and a 515 nm pump produced with a 200 W picosecond Yb:YAG InnoSlab amplifier. An output power up to 19.7 W with long-term stability of 0.3% is demonstrated for wavelength tunable pulses between 680 nm and 900 nm and ...
متن کاملCompact 10-GHz Nd:GdVO4 laser with 0.5-W average output power and low timing jitter.
We demonstrate a compact, diode-pumped Nd:GdVO4 laser with a repetition rate of 9.66 GHz and 0.5-W average output power. The laser is passively mode locked with a semiconductor saturable absorber mirror (SESAM), yielding 12-ps-long sech2-shaped pulses. For synchronization of the pulse train to an external reference clock, the SESAM is mounted on a piezoelectric transducer. With an electronic fe...
متن کاملPicosecond 554 nm yellow-green fiber laser source with average power over 1 W.
We demonstrate a source of 554 nm pulses with 2.7 ps pulse duration and 1.41 W average power, at a repetition rate of 300 MHz. The yellow-green pulse train is generated from the second harmonic of a 1.11 μm fiber laser source in periodically-poled stoichiometric LiTaO3. A total fundamental power of 2.52 W was used, giving a conversion efficiency of 56%.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Letters
سال: 2016
ISSN: 0146-9592,1539-4794
DOI: 10.1364/ol.41.004332