End-pumped 300 W continuous-wave ytterbium-doped all-fiber laser with master oscillator multi-stage power amplifiers configuration
نویسندگان
چکیده
منابع مشابه
frequency all - fiber laser in master oscillator power amplification configuration
We present a high power, single-frequency fiber amplifier based on master oscillator power amplification (MOPA) chains in all-fiber configuration. A 1.5 meter long highly doped Yb fiber with absorption coefficient as high as 16 dB/m at the 975 nm wavelength is used for the main power amplifier, no special assistant stimulated Brillouin scattering (SBS) suppression approach is employed. The maxi...
متن کاملW single - frequency all - fiber laser in master oscillator power amplification configuration
We present a high power, single-frequency fiber amplifier based on master oscillator power amplification (MOPA) chains in all-fiber configuration. A 1.5 meter long highly doped Yb fiber with absorption coefficient as high as 16 dB/m at the 975 nm wavelength is used for the main power amplifier, no special assistant stimulated Brillouin scattering (SBS) suppression approach is employed. The maxi...
متن کاملHigh peak power Ytterbium doped fiber amplifiers
1 Abstract We have tested a series of Ytterbium doped large core fibers operating near 10Kpps and producing pulses of approximately 1ns. We have achieved 850μJ/pulse resulting in peak powers in excess of 2MW with 0.4ns pulses and near diffraction limited beams. In another fiber, we have achieved over 1.5mJ/pulse with pulses of 900ps corresponding to 1.65MW of peak power and M of 2.5. In the lat...
متن کاملSingle-frequency, single-mode, plane-polarized ytterbium-doped fiber master oscillator power amplifier source with 264 W of output power.
We present a single-frequency, single-mode, plane-polarized ytterbium-doped all-fiber master oscillator power amplifier source at 1060 nm generating 264 W of continuous-wave output power. The final-stage amplifier operated with a high gain of 19 dB and a high conversion efficiency of 68%. There was no evidence of rollover from stimulated Brillouin scattering even at the highest output power, an...
متن کاملQuantum cascade laser master-oscillator power-amplifier with 1.5 W output power at 300 K.
We report quantum cascade laser (QCL) master-oscillator power-amplifiers (MOPAs) at 300 K reaching output power of 1.5 W for tapered devices and 0.9 W for untapered devices. The devices display single-longitudinal-mode emission at λ = 7.26 µm and single-transverse-mode emission at TM(00). The maximum amplification factor is 12 dB for the tapered devices.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2008
ISSN: 1094-4087
DOI: 10.1364/oe.16.017864