Emission Spectrochemical Determination of Boron in Steels with Pulse Height Distribution Analyzer
نویسندگان
چکیده
منابع مشابه
Determination of Aerosol Particle Size Distribution using Electrical Differential Mobility Analyzer (DMA)
Introduction: Determining the size distribution of the particles for assessing their effects on human health and their control mechanisms is very effective. One of the most important equipment used in determining particle size distribution is the DMA. In this study, in addition to the design and construction of a DMA, the size distribution measurement of aerosol particles was carried out. Mate...
متن کاملA Spectrochemical Determination of Sodium in Blood Serum*
A spectrochemical method for the quantitative analysis of sodium in blood serum has been worked out and used during the past 2 years for routine analyses. It differs in several respects from the methods described by Thomson and Lee (l), Langstroth (2), and Duffendack et al. (3) for measuring sodium in body fluids. The first two require specially constructed sparking arrangements for exciting th...
متن کاملRefraction in a pulsar magnetosphere — the effect of a variable emission height on pulse morphology
The Petrova (2000) model to calculate pulse profiles is extended to a variable emission height model to make it physically self-consistent. In this context variable means that the emission height is no longer considered to be the same for different magnetic field lines. The pulse profiles calculated using this new model seem to be less realistic due to a focusing effect and cannot be used to fi...
متن کاملdetermination of maximal singularity free zones in the workspace of parallel manipulator
due to the limiting workspace of parallel manipulator and regarding to finding the trajectory planning of singularity free at workspace is difficult, so finding a best solution that can develop a technique to determine the singularity-free zones in the workspace of parallel manipulators is highly important. in this thesis a simple and new technique are presented to determine the maximal singula...
15 صفحه اولInfluence of Boron on Initial Austenite Grain Size and Hot Deformation Behavior of Boron Microalloyed Steels
The initial austenite grain size of boron microalloyed steel with three different amounts of boron (20, 40, and 60 ppm) was investigated under different heating temperatures (1150, 1100, and 1050 °C), and hot compression tests of samples in a wide range of temperature (900–1100 °C) and strain rate (0.1–10 s−1) were conducted. It was found that the initial austenite grain size increases with inc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1983
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.69.2_326