Elution of Monomers from Provisional Composite Materials
نویسندگان
چکیده
منابع مشابه
Elution of residual monomers from dental composite materials.
AIM This study was designed to determine the type and amount of the monomers leached from the different particle sizes of the composite materials. MATERIALS AND METHODS Three different disk sizes (2, 4, 6 mm) prepared for each material group (Filtek Flow, Filtek A110, Filtek P60 and Filtek Supreme) were polymerised by LED and halogen light; the specimens were then placed in artificial saliva....
متن کاملThe effect of storage medium on the elution of monomers from composite materials.
The aim of this study was to evaluate the effect of four different storage media on the elution of monomers from two composite materials. Samples (n = 10, diameter: 4.5 mm, thickness: 2 mm) of two different composite materials (Ceram X™ & Filtek™ Supreme XT) were stored after polymerization in four different media (NaCl, saliva, ethanol 75% & acetone) for 24 h, 7 days, and 28 days. From the sto...
متن کاملModeling of Hygrothermal Damage of Composite Materials
Composite materials have been used extensively in various applications, such as mechanical engineering, aerospace engineering, and aviation thanks to their interesting mechanical properties. However, a substantial drawback in the use of such composite materials is that they absorb a significant amount of moisture when exposed to severe hygrothermal conditions. This factor dramatically affects t...
متن کاملFailure Criteria Analysis of Laminate Composite Materials
This paper deals with the development of a numerical simulation methodology for estimating damages in laminate composite materials caused by a low-speed impact. Experimental tests were performed on laminate plates reinforced with woven carbon fibers and epoxy resin. Three thickness plates were evaluated. The impact loads were transversal and punctual. Two lamina failure criteria were evaluated....
متن کاملProperties of Composite Materials
strength, flexural modulus, and contraction stress of one orthodontic composite and two flowable composites. Orthodontic brackets were bonded to 45 human maxillary premolars with the composites Transbond XT, Filtek Z-350 flow and Opallis flow and tested for shear bond strength. For measurement of flexural strength and flexural modulus, specimens were fabricated and tested under flexion. For the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Polymer Science
سال: 2015
ISSN: 1687-9422,1687-9430
DOI: 10.1155/2015/617407