Elongation and load deflection characteristics of reinforced concrete members containing plastic hinges
نویسندگان
چکیده
منابع مشابه
Bond Deformability of Reinforced Concrete Members
The usual earthquake resistant design philosophy of ductile frame buildings allows the beams to form plastic hinges adjacent to beam-column connections. In order to carry out this design philosophy, the ultimate bond or shear strength of the beam should be greater than the flexural yielding force and should not degrade before reaching its required ductility. The behavior of RC members dominated...
متن کاملCalibration of Load and Resistance Factors for Reinforced Concrete
Current approach for designing of reinforced concrete members is based on the load and resistance factor. However the load and resistance parameters are random variables, the constant values have been designated for them in the designing procedure. Assuming these factors as the constants, will be led to the unsafe and uneconomical designs. Safe designing of structures requires appropriate recog...
متن کاملPerformance of Continuously Reinforced Concrete Pavement Containing Recycled Concrete Aggregate
In 1995, the Texas Department of Transportation (TxDOT) began reconstruction in Houston on a section of IH-10 with continuously reinforced concrete pavement (CRCP). The unique aspect of this project was the use of crushed concrete as both coarse and fine aggregates in the new concrete. No virgin aggregates were used. The primary objectives of this study were to evaluate (1) the material propert...
متن کاملMechanical Properties of Plastic Concrete Containing Bentonite
Plastic concrete consists of aggregates, cement, water and bentonite, mixed at a high water cement ratio, to produce a ductile material. It is used for creating an impermeable barrier (cut-off wall) for containment of contaminated sites or seepage control in highly permeable dam foundations. The effects of water to binder ratio and clay dosage on mechanical properties of plastic concrete were i...
متن کاملPullout Load Analysis of Reinforced Concrete Anchor Shafts
In this paper, results obtained in both conventional and finite element analysis of straight and belled anchor shafts subjected to a pullout force are presented. In numerical analysis, it is assumed that no drainage takes place during the anchor pullout. Comparisons between two conventional methods of analysis for ultimate pullout load and the results obtained by the finite element analysis are...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of the New Zealand Society for Earthquake Engineering
سال: 1993
ISSN: 2324-1543,1174-9857
DOI: 10.5459/bnzsee.26.1.28-41