Elevated-temperature creep buckling of thermoplastic-matrix fiber composites under biaxial loading.
نویسندگان
چکیده
منابع مشابه
Permittivity measurement of thermoplastic composites at elevated temperature.
The material properties of greatest importance in microwave processing of a dielectric are the complex relative permittivity epsilon = epsilon'-jepsilon", and the loss tangent, tan delta = epsilon"/epsilon'. This paper describes two convenient laboratory based methods to obtain epsilon', epsilon" and hence tan delta of fibre-reinforced thermoplastic (FRTP) composites. One method employs a micro...
متن کاملTertiary Compression Creep of Long-Fiber Composites: A Model for Fiber Kinking and Buckling
The uniaxial compression-creep behavior of unidirectionally reinforced continuous-fiber composite materials was investigated for the case where both the matrix and the fiber underwent plastic deformation by creep. The creep behavior of NiAl composites reinforced with 5 to 20 vol pct tungsten fibers was characterized at 1025 8C. The NiAl-W composites exhibited a three-stage creep behavior, with ...
متن کاملCreep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites
The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...
متن کاملProperties of agave fiber reinforced thermoplastic composites
Biocomposites have attracted a great deal of interest in research and industry sectors because they are typically lightweight, sustainable, environmentally friendly, and their thermomechanical properties can be designed to fit specific applications by tuning of their composition. In this study, mechanical properties of natural-fiber reinforced thermoplastic composite films were explored. Thermo...
متن کاملOverview of Flax Fiber Reinforced Thermoplastic Composites
Flax fibres are oftenly used for reinforcing thermoplastic to manufacture biocomposite materials exhibiting numerous advantages such as high mechanical properties, low density and biodegradability. The mechanical properties of a biocomposite material depends on the nature and orientation of the fibres, the nature of the matrix and mainly on the adhesion between fiber and the polymer matrix. The...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Composite Materials
سال: 1990
ISSN: 0385-2563
DOI: 10.6089/jscm.16.93