Electrothermal Finite-Element Modeling for Defect Characterization in Thin-Film Silicon Solar Modules

Thin-film Silicon Solar Cells

The simplest semiconductor junction that is used in solar cells for separating photogenerated charge carriers is the p-n junction, an interface between the p-type region and ntype region of one semiconductor. Therefore, the basic semiconductor property of a material, the possibility to vary its conductivity by doping, has to be demonstrated first before the material can be considered as a suita...

Thin-film crystalline silicon solar cells

A photoelectric conversion efficiency of over 10% has been achieved in thin-film polycrystalline silicon solar cells which consists of a 2 μm thick layer of polycrystalline silicon with a very small grain size (microcrystalline silicon) formed by low-temperature plasma CVD. This has shown that if the recombination velocity at grain boundaries can be made very small, then it is not necessarily i...

Crystalline Silicon Thin Film Solar Cells

Nanoimprint lithography for high-efficiency thin-film silicon solar cells.

We demonstrate high-efficiency thin-film silicon solar cells with transparent nanotextured front electrodes fabricated via ultraviolet nanoimprint lithography on glass substrates. By replicating the morphology of state-of-the-art nanotextured zinc oxide front electrodes known for their exceptional light trapping properties, conversion efficiencies of up to 12.0% are achieved for micromorph tand...

ZnO Transparent conductive oxide for thin film silicon solar cells

There is general agreement that the future production of electric energy has to be renewable and sustainable in the long term. Photovoltaic (PV) is booming with more than 7GW produced in 2008 and will therefore play an important role in the future electricity supply mix. Currently, crystalline silicon (c-Si) dominates the market with a share of about 90%. Reducing the cost per watt peak and ene...