Electrostatic-modulated interfacial polymerization toward ultra-permselective nanofiltration membranes

Nanofiltration membranes

Simulation of thin film membranes formed by interfacial polymerization.

Interfacial polymerization is widely used today for the production of ultrathin films for encapsulation, chemical separations, and desalination. Polyamide films, in particular, are employed in manufacturing of reverse osmosis and nanofiltration membranes. While these materials show excellent salt rejection, they have rather low water permeability, both properties that apparently stem from the r...

nanofiltration membranes

0

Cellulose Acetate Nanofiltration Membranes for Cadmium Remediation

In this work, cellulose acetate (CA) nanofiltration (NF) membranes were prepared via non-solvent phase inversion technique (NIPS). Polymer concentration was varied from 22 to 25 wt% in order to study its effect on the membrane properties. The fabricated membranes were characterized in terms of morphological analysis using scanning electron microscopy (SEM), contact angle, water content, water p...

Performance and Structure of Thin Film Composite Reverse Osmosis Membranes Prepared by Interfacial Polymerization in the Presence of Acid Acceptor

During interfacial polymerization (IP) reaction between m-phenylenediamine (MPDA) and trimesoyl chloride (TMC), a by-product, i.e. hydrochloric acid can produce. This produced acid diffuses back in aqueous phase and protonates MPDA and reduces its reactivity that results in lowering of polymer yield and performance of membrane. Further, for getting consistency in reverse...