Electrostatic Induction Spray-charging System (Embedded Electrode) for Knapsack Mist-blower
نویسندگان
چکیده
منابع مشابه
Electrostatic charging of trigger actuated spray devices
Electrostatic charging has long been used to improve the efficiency of a range of sprayed liquids. However, the benefits have not until recently been available for exploitation by domestic sprays due to the need for a high voltage power supply. A minimum charge-to-mass ratio (q/m) of 1 × 10 C/kg is generally considered necessary to elicit electrostatic benefits. This level of charge can now be ...
متن کاملeffect of electrostatic induction parameters on droplets charging for agricultural application
in this study, an electrostatic sprayer which had been previously designed and constructed was evaluated in order to quantify the charging of droplets. liquid atomization was achieved by using an ultrasonic nozzle. the nozzle maximum flow rate was 25 milliliters per minute and vibration frequency was about 30 khz. the induction method was used for charging the output droplets. all experiments w...
متن کاملAn Equivalent Electrode System for Efficient Charging of Filtration Media
This paper concerns the influence of moving an auxiliary limiting cylinder in X-Y directions on the electrostatic field and corona onset voltage of the dual electrode system employed in the electrostatic filtration process resulting in a “Tri-electrode” system. The Tri-electrode system is applied in order to control the field around the ionized wire and on the ground plate. Accurate calculation...
متن کاملElectrostatic charging of jumping droplets.
With the broad interest in and development of superhydrophobic surfaces for self-cleaning, condensation heat transfer enhancement and anti-icing applications, more detailed insights on droplet interactions on these surfaces have emerged. Specifically, when two droplets coalesce, they can spontaneously jump away from a superhydrophobic surface due to the release of excess surface energy. Here we...
متن کاملElectrostatic-spray ionization mass spectrometry.
An electrostatic-spray ionization (ESTASI) method has been used for mass spectrometry (MS) analysis of samples deposited in or on an insulating substrate. The ionization is induced by a capacitive coupling between an electrode and the sample. In practice, a metallic electrode is placed close to but not in direct contact with the sample. Upon application of a high voltage pulse to the electrode,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Current Journal of Applied Science and Technology
سال: 2020
ISSN: 2457-1024
DOI: 10.9734/cjast/2020/v39i530549